AMC STAGE 2 STREET CLUTCH & SLAVE CYLINDER & X-LIGHT FLYWHEEL KIT compatible with 2010-2015 CHEVROLET CAMARO SS 6.2L 8CYL LS3 / 2014-2015 CHEVROLET CAMARO Z/28 7.0L 8CYL LS7

You are bidding on brand new XTD Stage 2 Sports clutch kit & 4140 Chrome moly Flywheel kit.This Carbon Kevlar clutch is generally used with our Street Series clutches. This disc uses the same CCI heavy duty high torque internal assembly used in our most extreme Strip clutches. We then add our unique woven Carbon durability using only the best Kevlar, spring center designs.This XTD Stage 2 clutch kit hold More HP and Torque Than Stock Pressure Plate and This Pressure plate is made from WKevlar, steel back frictions for maximum added burst strength and thermal dissipation. This is the ultimate Street clutch. This XTD Stage 2 Clutch Kit Includes XTD Heavy-duty Pressure plate,XTD Carbon Kevlar Steel-back Street Disc,Slave Cylinder,Pilot Bearing, Alignment Tool,4140 chrome moly 15LBS Flywheel,clutch installation and XTD clutch Logo Winshield decal.This XTD Pressure plate Holds 25% more ductile iron and heat Treated Which is about 20% Stronger Than Just Stock Cast Iron Pressure plate. XTD Stage 2 clutch is Designed for Smooth Engagement,quiet operation and good for Just Stock and Mildly Modified application.All XTD Sports clutch kit Designed for Street (Daily driving) so It won't make you difficulty on Everyday Normal driving.All XTD Racing Clutch Kit Required 500Miles Break-in Period.

XTD Flywheels are made using the highest quality, most modern materials available (Flywheel weight:15LBS). XTD could achieve manufacturing its original flywheels about 200% more strength compared with normal flywheels. It was forged using Chrome-molybdenum steel. The power of inertia rotation can be decreased by reducing the excess weight, and therefore, its strength directly passed through to the high response. The XTD light weight flywheel is made from the optimal weight and optimal form which were set up for each type of a car from the chrome forge material. By shaving all circumference of the chrome forge material, the variation in weight and the deviation of balance are pressed down to the minimum. Processing for raising wear durability and heat treatment etc... is performed in the surface. Various know-how for realizing lightness, strength, and high balance is condensed to the XTD light weight flywheel. If a flywheel is made light, it is said that an engine response improves. In case of revolving thing like a flywheel, the power (inertia power) which is always going to continue fixed rotation occurs. When an accelerator is stepped on in from an idling state, a flywheel tends to keep an idling state according to its inertia power, although engine is going to raise rotations. When inertia power becomes large, much time is needed for going up rotation. In the case of the XTD lightweight flywheel, since weight (especially flywheel perimeter part) is light, there is little inertia power of influencing rotation of engine. Since time to go up rotation is shortened, the response of engine to a accelerator becomes quick (a response improves).

Pressure Increase 19%/Torque Capacity 498ft/lbs/Hold up to 520HP.

✔Application of XTD Racing Clutch Kit

• compatible with 2010-2015 CHEVROLET CAMARO SS 6.2L V8 LS3
• compatible with 2014-2015 CHEVROLET CAMARO Z/28 7.0L LS7

✔XTD CLUTCH KIT INCLUDES

Ultra Heavy duty weight only 15LBS

XTD CARBON KEVLAR DISC

XTD LIGHT WEIGHT FLYWHEEL

AIMCO THROW OUT BEARING

PILOT BEARING

SLAVE CYLINER

ALIGNMENT TOOL