Your cart is empty.
Your cart is empty.
Product parameters:
Model: FZ102
Voltage: 110V
Power: 180-200W
Speed: 1400r/min
Crushing chamber diameter: 102mm
Screen aperture: 0.5, 1.0, 1.5mm (one installed on the machine)
Crushing effect: 30-120 mesh
Each crushing weight:
Product dimensions: 300×180×290mm
Working time: continuous (normal load)
Features:
1. The machine uses a high-speed rotating knife and fixed knife to form a cutting surface for crushing, which generates little heat. The crushing treatment of fib-er materials achieves the desired effect.
2. It has small volume, compact structure, continuous use, and can adjust the fixed knife gap according to the crushed material.
Scope of application:
Do not grind wet grains, wet grains are easily broken; the drier the better, the wet will damage the machine;
usage notice:
1.Do not put metal, stones, etc., to pre-vent damage to the blade;
2.The capacity of the container is 50 grams, please don't overuse it at one time;
Each time the material is put in, it needs to be put in slowly. When the bottom is crushed to achieve the effect, put a little more on the top, step by step; the amount of put in and crushed needs to reach a balance, the machine will not be stuck, and too much will be put in at one time , The bottom has not been crushed, causing the crushing cavity to be filled up, and the machine is easy to jam
3.After use, the crushing room must be cleaned up to prev-ent rust
4. Because the machine is coated with an-ti-rust oil in the crushing room when the finished product is put into storage, please wipe it with a dry cloth before use, so as not to affect the fineness of the crushed product and the leakage of the screen;
