Your cart is empty.
Your cart is empty.Product Description
102T / 3.5 ° ENGAGEMENT
The new HEX Drive rear hubs employ a huge ratchet ring with 102 teeth. Six independent pawls, each with 3 steps, work in unison to create 18 points of contact with the ratchet ring per click. The result is an almost instant pick – up of just 3.5 °, with unparalleled security against slippage under torque. The benefit in riding terms: no unwanted lag in your crank between pedal strokes, more efficient pedalling on technical sections and climbs, quicker, almost constant power to the pedals, and the 18 points of contact result in higher strength and better reliability.
ENHANCED SEAL SYSTEM
For the riders who subject their bikes to abusive conditions during the wet winters, and likewise for those with intense or prolonged exposure to fine dust conditions, we added an advanced seal system to reduce contamination. Oversized bearings further increase durability while maintaining the lighter weight of alloy. The benefit: low maintenance and easy service
OVERSIZED BEARINGS
In addition to the seal system, the pawl cap design has the added advantages of; keeping your pawls in place during maintenance (no more crawling on the workshop floor with a magnet looking for lost pawls); seals the pawls to prevent contamination during service and maintenance, and finally; also has the benefit of damping the volume of your high engagement hub- the sound we all love.
UNIQUE FLANGE DESIGN IMPROVES SPOKE TENSION CONSISTENCY
A unique flange design on the hub reduces dish requirements on the wheel build, meaning that the spoke tension on the drive side and non - drive side of the wheel is more evenly matched than many other hub designs on the market today. The benefit for the rider comes in a more consistently tensioned, therefore stronger, wheel.
REAR HUB ADAPTERS : HG / XD / MICROSPLINE UNIVERSAL FIT
No more XD vs HG or MS freehub specific adapters. All HEX rear hub adapters work with either freehub type.
FRONT HUB ADAPTERS : L / R UNIVERSAL FIT
No more left vs right front hub adapters . All HEX front hub adapters are interchangeable from left to right side .
Ø32
HEX J - Type front hubs have 32mm diameter bearings, and require Ø32 HEX front hub adapters, accommodating QR, 10mm, 12mm, 15mm and 20mm standards.
Ø28
HEX Straightpull & Gravel front hubs have 28mm diameter bearings, and require Ø28 HEX front hub adapters, accommodating QR, 10mm, 12mm, and 15mm standards.
$49.99
$ 23 .99 $23.99
$379.00
$ 99 .00 $99.00
$81.00
$ 33 .99 $33.99