Your cart is empty.
Your cart is empty.
Specification
Engine Type: Single Cylinder, 4 Stroke, Horizontal, Two-stage Transmission
Other Features: 3 Forward Gears and 1 Reverse
Material: Aluminium, Cast Steel
Engine Cooling Type: Air Cooling
Ignition System: CDI (Not Included)
Start Mode: Kick-starter; Electric
Clutch Type: Manual Wet Multi-Disc
Transmission: 4-speed, Manual Gear Shift
Displacement: 125CC
Minimum No-load Stable Speed: 1400 (1 ± 10%) R / min
Compression Ratio: 8.7:1
Bore Stroke: 54x54mm/2.12x2.12inch
Max Power: 5.8Kw/h
Max Torque: 8.0N-m
Max Rotating Speed: 7500rpm
Horsepower: 7.64HP
Air Inlet and Exhaust Valve Clearance: 0.05 ~ 0.07 mm (Cold State)
Min Fuel Consumption: ≤367g/kW.h
Spark Plug: A7TC
Carburetor Type: PZ19 (Not Included)
Min Stable Idle Speed: 1500r/min±150r/min
Primary Reduction Ratio: 3.722
Transmission Ratio of Each Gear: First Gear: 3.272; Second Gear: 1.938; Third Gear: 1.350; Fourth Gear: 1.043
Lubricant Capacity: 900ml/0.23 Gallons
Lubricant Type: SL10W/40 (Not Included)
Crankshaft Diameter: 1.5cm/0.59inch
Crankshaft Length: 0.4cm/0.15inch
Gasoline Type: ≥ 92 #
Gross Weight: 19.45kg/42.87lbs
Net Weight: 18.15kg/40.01lbs
Product Size: 45x30x25cm/17.71x11.81x9.84inch
Package Size: 51x39x33.5cm/20.07x15.35x13.18inch
Package Included
1xATV Motor Engine
1xGearshift Lever
1xChain Cover
1xIntake Manifold
2xIntake Gaskets
All Accessories for Assembly
Notes
1. Professional installation is highly recommended.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Christopher Bell
Reviewed in the United States on September 6, 2024
I bought this engine to replace a broken old one. It was very easy to install, just needed main bolts and a few wires, runs like a beast and is recommended!
Recommended Products
