Your cart is empty.
Your cart is empty.Product Description
Aoryimt 13 1/4 x 17 Aluminum Alloy Propeller Replaces No. 48-77344A45
Diameter: 13 1/4" Outboard Propeller
15 Tooth Spline Motor Propeller
3 Blade Aluminum Propeller
48-77344A45 Engine Propeller
How to choose a proper boat propeller ?
The information that we need to know to make sure the propeller is suitable
1. Propeller dimension:
The pitch and The diameter of the propeller in inches
2. The material:
Propellers can be manufactured by aluminum, stainless, polished steel, or heavy plastic composition.
Please carefully check your boat manual for the propeller original material.
3. Engine RPM:
Make sure your engine can be operated at the manufacturer’s maximum recommended engine RPM.
This will allow your engine to run more smoothly.
Stewie
Reviewed in the United States on September 15, 2024
I had put up with a badly damaged prop for a whole season as I thought a new one would be expensive and hardly worth it for my old pontoon. This was reasonably priced and I installed it in about 10 minutes! Works great and would definitely order again!
John N.
Reviewed in the United States on August 5, 2024
Needed a spare prop to keep on the toon for any mishaps where this one will save the weekend and be the hero. Installed to check the fit, tried it out and it works great. Returned it to spare duty only because this pitch isn't as preferable for my set up. For a small HP motor, everyday or occasional this prop will work great and not cost a lot. It's a well made product, I recommend purchasing.
Zann
Reviewed in the United States on July 10, 2024
As far as replacement propellers go, this one hits all the hight points.It looks and performs exactly like the OEM prop. Installation was simple and convenient. It has taken several lengthy tours of the water and been fine.
IslandBum
Reviewed in the United States on June 18, 2024
Quality: Propeller is well made, with a smooth finish and thick paint or coating. The supplied hardware is solid brass and fits the Mercury shaft. The nut fits a standard 1-1/16-inch socket.The only potential issue is that the castle washer sits high on the drive sleeve and does not fully engage the shaft splines. This may not be a problem, as the entire assembly can be torqued down (55 foot-pound) and appears to be quite solid.Functionality: I ordered this unit as a spare and have not had a chance to try the propeller on the water yet.Considering the quality and cost, this is a good deal.
ReelNice
Reviewed in the United States on June 14, 2024
Bought this as a spare, but tried it out first to make sure it works. It had no vibration and ran just as good as my primary prop. It includes all the needed hardware and inserts to make it work. Built well and performs well too!
Rebecca
Reviewed in the United States on May 28, 2024
Easy to install, easy to operate and it has worked perfectly! I hope this last for years to come. Now that I can drive a boat better I think this one will perform way better than the last one I had!
Jim Hewitt
Reviewed in the United States on May 19, 2024
I got this 3-bladed propeller to replace the larger diameter 4-blade propeller I currently have on my boat. The 4 blade prop gives good hole-shot and cornering performance, but does not allow the engine to reach proper wide-open-throttle RPM range or boat top-end speed. The idle speed is also a little fast for my trolling purposes. I hope to increase the WOT RPM and perhaps speed, and also slow down the idle speed.The rubber prop hub is pre-installed and looks to be centered.Black finish is cool looking and smooth and glossy.It’s still a good month or so until the weather conditions here will allow the boat to be deployed on the water. The propeller is competitively-priced aluminum propeller, especially since it includes the hub. If it doesn’t achieve my RPM/speed goals, it is still certainly worth it, and worthwhile to keep and stow onboard as a spare. It should be as durable as any aluminum prop can be.
S
Reviewed in the United States on May 16, 2024
The 13 1/4 x 17 Boat Motor Aluminum Alloy Propeller for Mercury Engines is an excellent choice for enhancing the performance of your outboard motor. Designed to fit Mercury Outboard Engines ranging from 60-125HP, this propeller is identical to original OEM parts, specifically replacing part number 48-77344A45.This propeller features a 13 1/4 inch diameter and a 17 inch pitch, with three blades and a right-hand rotation. It is constructed from premium alloy aluminum, ensuring durability and improved blade performance. The black finish adds a sleek look to your vessel.Quality is a key aspect of this propeller. It has undergone rigorous quality screening to ensure it is extremely durable. A high-quality propeller like this one helps reduce engine wear and improve fuel efficiency, contributing to the overall longevity and performance of your boat's engine.Installation is straightforward and hassle-free. Using the new attributable hub kit, you can install the propeller in about 10 minutes. Just make sure to switch the engine to neutral and turn off the ignition before starting the repair.The propeller comes with a warranty, providing peace of mind and reliable support. If any issues arise, customer service is available to assist within 24 working hours.Overall, this 13 1/4 x 17 Aluminum Alloy Propeller for Mercury Engines is a highly recommended upgrade for boat owners looking for durability, improved performance, and easy installation. Its robust construction and compatibility with a range of Mercury engines make it an excellent investment for maintaining and enhancing your boat's performance. :)
Recommended Products
$229.89
$ 99 .00 $99.00
$381.00
$ 99 .00 $99.00