Your cart is empty.
Your cart is empty.Rayen's sleeve board cover is the perfect accessory for ironing the sleeves, collars and shoulder pads of your favorite clothes. Rayen's sleeve board cover is suitable for all sleeve boards available in the market. Rayen's sleeve board cover is stretchable for perfect fastening to the sleeve board. Rayen's sleeve board cover is made of high quality materials approved by Rayen. Rayen's sleeve board cover measures 23.6 x 7.9 Inch.Rayen's sleeve board cover: Rayen's sleeve board cover is made of high quality materials Rayen's sleeve board cover is perfect for inaccessible parts such as collars, sleeves, shoulder pads, etc. Rayen's sleeve board cover is suitable for all sleeve boards available in the market Rayen's sleeve board cover is stretchable for optimal fastening to the sleeve board Rayen's sleeve board cover measures 23.6 x 7.9 InchRayen's sleeve board cover is perfect for inaccessible parts of your delicates. It includes instructions of use.
Suma Rajaram
Reviewed in Australia on May 12, 2025
product is good , but we dont get a sleeve stand of that dimension
ebu
Reviewed in Germany on March 23, 2025
passt
ale
Reviewed in Italy on July 17, 2024
Ottimo
M
Reviewed in Japan on February 9, 2024
ゴムの部分の縫製が良くなかった…布が外れているところがありがっかりしました。返品してまた同じようなものが来たら面倒でしたので、自分で縫い直しました。ゴムの縫い始めと終わりの重なる部分も切りっぱなしでゴムの糸がボサボサでした。ここも 布テープで被せて縫い直しました。本体とカバーがピッタリしないのでカバーが浮いているような感じで、少しがっかりしました。なんかネガティブなコメントになってしまいましたが、お店の対応が良かったのと、カバーの柄は可愛いので使います。使っていくうちに愛着が湧いてくることでしょう(w)。
JCat
Reviewed in the United States on October 22, 2023
Although they list the dimensions as 24.2" L x 8.5"W, they include the elastic edge, (that should wrap under the board to hold the cover in place), in those dimensions. And that elastic edge is a good 1/2" all the way around. So, this cover that should fit the sleeve board, is actually much smaller than listed. My sleeve board is 23" x 7-1/4" and this cover DOES NOT FIT. There is absolutely no way to get it on my board. Spent about 30 mins trying to force it, and the cover fabric has zero give to it. Very disappointed. I should have saved my money and sewn my own. Do not buy this cover unless you want to waste your money.
Kunde
Reviewed in the United States on January 23, 2021
Very nice and affordable replacement cover.
JudyJ
Reviewed in the United States on January 18, 2021
It fits well and holds up under the highest heat settings
Aline M.
Reviewed in the United States on August 17, 2019
Good quality, good product
DOMEAU Michelle
Reviewed in France on March 9, 2019
Pour repasser bien sûr
Betsey H
Reviewed in the United States on December 15, 2019
Liked the quality of the cover but it doesn’t fit as snuggly as I’d like.Since I haven’t seen any other covers for a sleeve ironing board this one will work.
Carolyn Norman
Reviewed in the United States on October 19, 2018
It was a little larger than my sleeve board but I could make it work. It's as advertised.
Kip
Reviewed in the United States on January 17, 2017
There weren't a lot of choices for replacing the pad on my sleeve board. This one does the job, but I think it is pricy. I thought it would come with more padding, but is is basically a cover. The box says it has 3 layers, but they are really thin. My board is a tad under 21 inches long and is 6 inches at its widest. It was a bit of a struggle to get it on; at first I thought is was not going to fit. The box says the dimensions are 24.2" x 8.5". But beware, it will not fit a board that large as there will not be enough fabric to cover the edges. There is no drawstring, just elastic. The fabric is OK. The box says it is "highly heat-resistant titanium resin". It is recommended that you install the cover from the wide end of the board forward and then iron the cover to perfect the fit. The product is made in Spain. I would prefer a plain cover rather than a print.
Mary P. Gibbons
Reviewed in the United States on April 10, 2015
I have an old home-made sleeve ironing board, and until recently I was unable to find a new cover to replace the worn one. I was happy to receive the Rayen sleeve board cover, but it did not fit perfectly. I did not expect it to, and I used a large safety pin to tighten it.
Recommended Products
