Your cart is empty.
Your cart is empty.Product Description
Forst
Reviewed in Germany on May 13, 2025
Hotend mit 0,4mm Düse ist nach kurzer Zeit undicht geworden/ geplatzt.
Hunter
Reviewed in the United States on April 9, 2025
The items I received are NOT hardened nozzles, they're brass. For the price I paid, and the timeline I needed the correct item delivered, this is exceptionally disappointing. If you're willing to take the chance you can, otherwise look elsewhere.
Raffaele
Reviewed in Italy on April 5, 2025
Scadente, valori della temperatura sbaglianti e non stampa nulla.Le sonde hanno dei problemi bisogna utilizzare le originali
Daniele guardo
Reviewed in Italy on April 3, 2025
Ho comprato questi kit per poter stamapre in futuro materiali tecnico, ma come qualche altra persona stavo impazzendo. Non estrude a nulla dovuto al fatto che il sensore temperatura dato in dotazione non rileva le giuste temperature e quindi il si pensa di stampare ha 215 gradi (pla) ma invece per poterlo estrudere bisogna stare sui 250 gradi. Consiglio di montare il sensore termico originale che esce con la stampante per risolvere il problema(Aggiornamento)Il rivenditore ha capito il problema e mi ha subito sostituito gli hotend, consiglio vivamente di acquistare da lui.
Joshua Z
Reviewed in the United States on April 22, 2025
Anycubic Kobra S1 owners should know that our 3D printer requires a 200k (resistance) thermistor for accurate temperature readings. This hot end replacement has a 100k thermistor and will show a much higher ambient temperature reading when used and will damage your printer extruder or at the very minimum cause print quality to be terrible. Do not buy this hot end from this seller. They knowingly selling a defective product to you.
thierry poirier
Reviewed in France on April 13, 2025
La thermistance est faussé de presque 30° se qui pause un problème par rapport au filament technique de type abs , asa ... Ont doit tâtonné sur les profils de température et ont atteint presque les limites de la machine .
erickuntz
Reviewed in the United States on August 3, 2024
Recently had a bad heating coil in hot end on my K1 and decided to convert it over to use the "Unicorn" style nozzles. Since converting to "Unicorn" style nozzles, I have had no issues with the nozzle getting plugged but decided I should have a spare nozzle or two on hand just in case. Even though these nozzles are not an original Creality product, other than the Creality stamp on the tube and the packaging, I can't tell the difference. They even appear to have hardened orifices just like Creality nozzles. I tested out one of these nozzles this weekend. I had multiple print jobs using different filament types. It ran all weekend long, without an issue and never had any clogging. It seems to work as good as the Creality nozzles.
James Lummel
Reviewed in the United States on August 21, 2024
I got these as spare nozzles for an early production K1 printer which has been upgraded with the latest version of their extruder with a 3rd-party metal-gear add-on, and an updated K1C-style Ceramic Heating Block Kit that accommodates these Creality Quick-Swap nozzles.Thanks to these enhancements, the K1 handles most filaments very well, resulting in minimal printing issues.
ChiViewer
Reviewed in the United States on August 2, 2024
The best feature of this build plate is something that I wasn't expecting, and that's its excellent adhesion. It's so smooth that I assumed my prints wouldn't stick well but I was surprised to find that it in fact sticks really well. I've run several prints so far and all have been great. And as expected, it's really easy to remove them once cooled. The patterns transfer nicely to my prints, although since I'm using white filament they are pretty faint. I assume that when I switch to a darker color that the patterns will show up better.
Josh
Reviewed in the United States on August 12, 2024
Using it on a printer too large for it but the prints it’s small enough to accommodate come out with a terrific holographic effect on the bottom
Seth
Reviewed in the United States on December 2, 2024
I grabbed this because I was curious about the geometric pattern for the base plate. It looks pretty cool and wish it was possible to make all sides have the same pattern. The plate it self has decent adhesions, but I don't tend to run into many issues in general since I primarily print PLA. I used this on my P1S, which the plate isn't designed for, but did notice that the plate isn't magnetic, and will need to be clamped down, not sure what the Kobra 3 has, but if its suppose to be magnetic, there may be better options.
Recommended Products