Your cart is empty.
Your cart is empty. G8P-1A4P-12VDC: the number of contacts /1 pole single contact, the contact structure is 1A contact single pole single throw normally open type, the terminal shape/printed board terminal is welded and installed, the protective structure/fully sealed type (sealed with breathable * * *), the coil control voltage is 12VDC, the coil resistance is 155 ohms, and the coil power consumption is 0.9W.
Contact mechanism: single contact.
Contact material: Ag alloy (Cd-free material)
Rated load (suitable for G8P-1A4P series): AC250V30A/DC28V 20A.
Rated current (suitable for G8P-1A4P series): 30A.
Withstand voltage: AC2500V 50/60Hz 1min between the coil and the contact, and AC1500V50/60Hz 1min between the same pole contacts.
Impact voltage: 6.0KV 1.2*50 between coil and contact.
Mechanical life: more than 10 million times (switching frequency 18,000 times /h)
Electrical life: about 100,000 times.
Service ambient temperature:-55 ~+105℃ (cold start state, no icing) -55 ~+85 degrees (hot start state, no icing)
Operating environment humidity: 5 ~ 85% RH
Weight: about 24g
Peter W
Reviewed in the United States on December 8, 2023
After the original relay stopped working, and didn't want to buy a whole new control board as it was still operational, I figured I would try and just replace the relay. This one was an exact match for what was on the board and a bit of soldering I was back up and running and they switched the 240v AC power lines easily without any further issue.
Recommended Products
