Your cart is empty.
Your cart is empty.Product Description
Recyclable
The soap mould is made of platinum silica gel and can be reused. It is not easy to deform after being used for many times to maintain the integrity of the finished product.
Easy Demoulding
The soap mold is made of soft material and has good elasticity. It can easily to demold while maintaining the integrity of the finished product.
Easy To Clean
Soap silicone mold can be washed with water or put into the dishwasher. Ensure the cleanness of the mold while cleaning effortlessly
Laura Ozuna
Reviewed in Canada on March 28, 2025
of all my soap molds this is by far my fav, the silicone is the best silicone I tried. Have used for 4 years
Kindle Customer
Reviewed in the United States on March 15, 2025
Wet sturdy good product
Soaper
Reviewed in the United States on June 8, 2024
Mold has kept its shape after several uses. Soap was also easy to remove. This mold is just as good as the Brambleberry mold.
Leah Herbas
Reviewed in the United States on March 30, 2024
This mold is the best practice mold for a newbie soap maker that doesn't want something big in case they mess up. It's much less material to be wasted. This gives about 4-5 bars. Great little mold. I've purchased several times for my soap making classes.
JABC
Reviewed in the United States on December 13, 2024
product as described. good quality
T
Reviewed in the United States on October 16, 2023
Easy to use, sturdy, doesn't flop all over like most. I would absolutely buy from them again if there were more prime products. I cant wait one month for a mold.
Alicia
Reviewed in the United States on August 13, 2021
I have made a lot of soap with this mold. You can see me use it on my YouTube channel. Search my name Alicia ArroyoI use this for both melt and pour as well as test batches of cp soap. If you fill this mold all the way your bars will be fairly large. 16 Oz of soap will not fill this mold.The only thing I am not sure if I like it can be hard to remove from the mold. You have to break the seals on all sides before you push the soap out. However it’s a super sturdy mold.I would recommend this and I will buy again if I need to. I feel like it will last for years.
Shea Conner
Reviewed in the United States on July 21, 2021
Super great mold. Very sturdy. I use them for resin pouring and I now have 2 of them! The only complaints I have is that the bottom does bow a bit once it starts to sit, bit that's the top of my piece so I really don't mind, and that it is difficult to remove the resin once it's cast. Cleaning is no problem. I just wipe it down with a damp cloth and it's ready to go again. Both of these problems are probably me doing something wrong so I'm going to give it the five stars it deserves.
Customer
Reviewed in Germany on February 8, 2021
Keeps the shape, much easier to unmould and easy to clean. Good buy, worth the wait.
jenna makos
Reviewed in the United States on April 3, 2021
4.3.21Love these MOLDS 👏🏼!! Perfect for small batch soaping. Pics of my 1st 3 batches included. NO ISSUES. Recipes fit perfectly, with a little room at the top to add some swirls, mica, and dried flowers. Smooth, Easy, and Clean removal EVERY time. No pieces left, or lines, etc.FYI-(for all the complaining comments regarding removal of soap and how much it fits):Removal?-I use Sodium Lactate (1 tsp for every 1 lb of Soap in Lye Water after cooled to 140 degrees), let soap batch in mold sit for 48 hrs then unsuction all sides gently, gently flip over, then gently wiggle/unsuction sides intermittently to skooch it off. My soap log comes out perfect every time.How much does it hold?-Come on soapers, figure it out. 42 oz of water fits in the mold but oils used in soap making weigh differently. For any mold, use inside mold measurements, then use the “all over the internet” calculation to figure out how much will fit in the mold.32 ounces / 2.125 pounds fits in the mold, and with 40% of that being your oils, you can run your numbers through the soap calc and voila.There is never not enough, or never too much, fits perfectly every time.Happy Soaping !!
Griselda
Reviewed in Mexico on November 2, 2019
Llego antes de tiempo excelente producto
Hana Hardwick
Reviewed in the United Kingdom on October 3, 2019
This is a very good quality product and deserves 5 stars. Watertight and very solid. Love it. 100% service. I would recommend this mould to every soaper.
Suganya Rajendran
Reviewed in India on April 7, 2019
The quality of the product was very good and delivery as mentioned !!!
Recommended Products