Shopping Cart

Your cart is empty.

Your cart is empty.

49mm Fork Cap Wrench Tool For Motorcycle YZ125 250 250F 450F Motorcycle Repair Spanner Tools

4.8 (4) Write Review
Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

About this item

  • 49mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM's.
  • Designed to fit modern double chamber forks with a 49mm hex cap.
  • The fork cap toolset includes a 49mm outer cap wrench with a slotted handle to hold the damping rod and the 12mm inner fork cap wrench.
  • Durable, hardened steel construction with a zinc coating.
  • Wrench: 49mm Fork Cap Wrench


Features: Designed to fit modern double chamber forks with a 49mm Fork cap. 12mm slot used to hold the damping rod so that the fork cartridge can be removed. Compatibility: For all closed chamber forks (bladder), such as: for KTN SX / SXF 2007-2013; For KTN XC / XCF 2008-2013. For Husaberg FX / SM 2010-2011. For Husaberg FE 2011-2012; For all AER and Xplor forks, such as: For KTN 125-450 SXF / XCF, 250 / 300XC 2017-2018. For KTN 125-500 EXC / XCW / EXC / 6D 2017-2018. For Husqvarna FC / FX250-450, TX250 / 300, TC125 / 250 2017-2018. For Husqvarna TE125-501 2017-2018.


Alex Chulzhanov
Reviewed in the United States on February 2, 2024
It's a pretty basic wrench that serves one purpose, so I can't complain much. But the tool quality is very poor and did not even work without some modification.It is just a piece of stamped aluminum, and the 'paint' finish is extremely poor with a ton of orange peel and not very durable. I actually had to file off the paint and clean up the edges of the tool's contact surfaces because it would not even fit on the fork cap. After some filing work it fits pretty nicely and I am able to use it okay.For the Motion Pro tool being like $5 more than this one, I would suggest buying that one instead. The Motion Pro fork cap wrench looks to be either laser cut or properly milled instead of a cheap manufacturing process like stamping, and with a proper anodized finish that does not affect the tolerances of the tool like the poorly painted surface finish of this one.
Spada4
Reviewed in the United States on April 11, 2024
did not fit the kayaba forks on my Stark Varg. had to modify so can't return.
Orrin
Reviewed in Canada on September 23, 2023
Item is described as a 49mm cap wrench but did not even come close to fitting my fork caps, had to modify/file to wrench in order to make it fit
sg
Reviewed in the United States on August 28, 2022
I had to grind the powder coat off and a little bit of the material to make it fit. No I did not have the wrong size. Spend a couple extra dollars and buy a better quality one.