Your cart is empty.
Your cart is empty.
Features:
Easy to Carry: With the size of 50x30x30cm and weight of 10.85kg, you can carry it to the place you want without too much effort.
Small Output Shaft Diameter: The output shaft diameter is only 20mm, which takes up little space.
Ergonomic Design: The ergonomically designed double handles can help you operate the machine more stably.
Easy to Operate: The manually operated planter drill bit only takes one or two persons to operate.
Long Drill Bit: The drill bit has a length of 80cm. It can be used to dig holes of various depths for multiple purposes.
Throttle Switch: The machine has the latest hand-held throttle total range, making the operation more convenient and comfortable.
Specifications:
Weight: 10.35kg. (without bit)
Rotational Speed: 8500rpm
Horsepower: 2.4hp
Engine: Single Cylinder, 2-stroke, air-cooled
Fuel mix: 25/1
Drill Bits: 4", 6" and 8"
Bit length: 31" Cylinder Capacity : 52cc
Power: 1.9kw/7500rpm
Package Included:
1 x Digging machine
3 x Drill Bits: 4", 6" and 8"
1 x 12" Extension Bar
1 x Fuel Mixing Bottle
1 x Funnel
1 x Starting Handle
Tool Kit for Assembly
Notes:
1.You should fill the fuel tank with mixed oil (gasoline: two-stroke engine oil=25:1). Remember to add butter to the gearbox.
2.Pull the starter quickly when starting, don't stop midway when pulling.
3. Start the machine before the throttle switch opens.
4. Press the oil bubble a few times before starting. If the oil pipe has oil in and out, it suggests that the oil has been supplied.
5.When cold starting the machine, close the damper first, then reopen it, so that you can run it normally.
Renee P
Reviewed in the United States on May 13, 2024
The document called user manual is leaking a diagram which labels parts mentioned. There are parts mentioned that are non-existent such as a vent screw in the fuel cap. The choke is important to the start up procedure including priming and the instructions mention RUN and OFF positions but it is not labeled on the machine. Being familiar with small engines I was able to weed through the inconsistencies with the exception of mixing fuel. The manual says to use a 25:1 yet the guide to mix is a 50:1 ration which is the norm. All that said, the machine works great. It started easily, ran smoothly and cut right into the soil for the 30 inch deep holes I needed.
rick mobley
Reviewed in the United States on May 1, 2024
Low price, High Quality. Get's the job done! Started first pull...all day.
Recommended Products
$20.99
$ 10 .99 $10.99
$246.00
$ 99 .00 $99.00