Your cart is empty.
Your cart is empty.Product Description
810-CID2246L
About 8TEN
8TEN Parts provides lawn & garden replacement parts. Some of the 8TEN Parts product categories include blades, spindles, pulleys, idlers, and chainsaw chains. 8TEN Parts are here for when you need them the most.
8TEN Idler Pulley Part Number 810-CID2246L
- Includes: 8TEN Idler Pulley
- Compatible with the following brands: AYP,Husqvarna
- Compatible with the following models: EZ 4220 4822 5225 5424 RZ 4219
- Replaces for the following OEM MPN's: 539132728,539-132728,539112196,539131148
- Inner Diameter: 11/16 inch
- Outer Diameter: 5 7/8 inches
- Height: 1 15/16 inches
Idler Pulley Dimension Terms
- Width: The distance from side to side of the pulley, the area where the belt is found
- Inside Diameter: The distance across the center hole, This dimension should match the diameter of your shaft or bolt
- Outside Diameter: The distance across the circle of the product, from outside edge to outside edge. For flat idler pulleys, this will include the flanges
- Back Side Offset: The width from the center of the pulley to the backside edge of the hub or bore adapter
- Frontside Offset: The width from the center of the pulley to the front edge of the hub, bearing, or bore adapter
- Throughbore: Length of the bore, from one edge to the other. The Frontside Offset and Backside offset together equal the length of the throughbore
- Bearing ID: The inside diameter of the bearing used in the pulley
- Flanges: These are protrusions out from the center of a pulley, designed to keep a belt from slipping off
- Stickout: The distance from the edge of the pulley’s flange to the edge of the bore adapter or hub.
8TEN Idler Pulley Uses
- Redirect the belt
- Keep the belt in place
- Press against the belt to cause the belt to engage
- The goal of an 8TEN idler pulley is to move power or items from one place to another
- 8TEN idler pulleys move power by having a drive pulley attached to a motor, that will cause another pulley, the drive pulley, to spin
- Idler pulleys are pulleys in a system that are not connected directly to the power source, and cannot increase speed or torque
Gerl Mckinney
Reviewed in the United States on January 7, 2025
Purchased in Jan 2024, one came apart before the end of the year, and other 2 are about to come apart. Not worth the time and effort to install these, must redo in Jan 2025.
Charles Wilson
Reviewed in the United States on February 24, 2022
Works well
mark b.
Reviewed in the United States on October 30, 2022
Correct part fast shipping husqvarna zero turn
arnold c.
Reviewed in the United States on September 5, 2021
pulleys worked great
FXB
Reviewed in the United States on July 9, 2021
Fit like a charm
PFM-LLC
Reviewed in the United States on August 23, 2020
Oem pulley, one went out at 2000 hours, decided to replace all 3 on an mzt52. Hopefully these last as long as those did. So far they are working great.
Dc1001
Reviewed in the United States on June 6, 2020
It was a perfect match and fit. I only needed the one, but bought and replaced all three. The funny thing is the Husqvarna parts site didn’t have this in stock.
Charles H
Reviewed in the United States on September 30, 2019
just fine
Recommended Products