Your cart is empty.
Your cart is empty.Product Description
Vehicle Fitment:
Compatible with Subaru Models:
- For Subaru Baja 2003-2006
- For Subaru Forester 1998-2008
- For Subaru Impreza 1997-2008
- For Subaru Impreza Sport 2008
- For Subaru Legacy 1994-2009
- For Subaru Outback 2000-2005
Part Number: 917-124, 73092AA000, 73132AC000, 73134AC000, 73134AC001, 73134AC010, 73790AC100, 902380006，73*790AC100
Detail Information:
- Notes: 1x Idler Puller Adjuster Bolt Kit
- Color: Silver
- Material: Steel
daniel lahera
Reviewed in the United States on January 24, 2024
The tensioner portion itself that’s threaded, was reverse thread and wrong size from the bolt it came with. Also wrong threads from the OEM bolt. Also the nuts included do not thread onto bolt to lock it down. None of the parts were usable
TinTin
Reviewed in the United States on July 17, 2023
I ordered this because the alternative was much more expensive from the dealer. The adjuster is made of metal which is much better than OEM, only reason this set isn't a 1 star. When I got this, the install should have taken no more than 15 minutes, maybe up to 25-30 minutes at worst. But what I found was that the adjuster provided has either threads that aren't the same pitch/count or need to be cleaned out. The bolt started threading by hand as is a good check to confirm the threads match, however, after a few turns it got tight. The thought was that maybe there was bur in the threads causing a block or friction. But when I tried to tighten past that point just a 1/4 turn, it got much harder. I backed out the bolt and found that a thread was stripped. I didn't have a thread repair kit or a tap & die set for that size and left hand thread, so I was forced to use the bolt as a poor mans rethreader to chase the threads. Doing this I found that the threads didn't match, bolt to adjuster. It's on my car now, and works as intended, but only after forcing the bolt through the adjuster and rethreading it that way. All this to say, use a thread repair kit of the right size and left hand thread type to chase the threads so you know the bolts will thread without issue.
Seanessey
Reviewed in the United States on July 11, 2023
Bolt broke when I was setting up to do a timing belt job on my outback. This saved me
NdadaK
Reviewed in the United States on June 24, 2023
Replaced broken a/c tensioner pulley adjuster with this one and it is made of steel not plastic 2008 outback.
Larry Skillin
Reviewed in the United States on October 4, 2022
Repair automobile
Jose M.Bueno
Reviewed in the United States on October 29, 2022
Good fit but didn’t arrive complete I got missing one nut that goes under the idler to tense the belt, I was able to found it on a local store so I did purchase it by my own
Getsome
Reviewed in the United States on October 19, 2022
Broke my original idler pulley adjuster when I changed my timing belt on my 2004 Subaru Outback, I was extremely happy to find this replacement. I didn't have too many expectations, but was pleasantly surprised when this worked as it should.
Recommended Products
$55.99
$ 28 .99 $28.99
$109.44
$ 48 .99 $48.99