Your cart is empty.
Your cart is empty.ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them.
Howard
Reviewed in the United States on January 7, 2025
Works really great on 97 wrangler
Will
Reviewed in Canada on April 17, 2025
Doesnt fit on my TJ 1997 front passenger
kevin wertz
Reviewed in the United States on July 17, 2024
Fit and work great. Great value.
jim nicholson
Reviewed in the United States on June 20, 2024
fit like a glove.
1 rst Sgt C
Reviewed in the United States on June 2, 2024
Clean New renew Rebuilt included new seals, bolts.Same as original High Quality
John M.
Reviewed in the United States on February 29, 2024
Works good and comes with all the shims and parts needed. Good quality rebuilt item.
Etiene van Wyk
Reviewed in the United States on November 28, 2024
Easy to install. Came with brand-new bolts. Fitted to my Jeep TJ 2001 Rubicon.
Just Enough
Reviewed in the United States on October 16, 2024
Good stuff and works well on the old YJ
Donald Hamilton
Reviewed in Canada on January 27, 2024
Had problems with the first one but seller replaced it
Wesley Weinzierl
Reviewed in Canada on August 7, 2023
RECOMMEND THIS PRODUCT EASY TO INSTALL CAME WITH ALL HARDWARE.
Junior
Reviewed in Canada on August 5, 2023
Jeep tj 2003 avant droite exactement comme lui d’origine un excellent produit 🤩
New flats for old ones
Reviewed in the United States on July 17, 2023
I ordered both left and right to replace the ones on my 2001 Cherokee. The left had a plastic plug in the hole for the banjo bolt, with 2 crush washers! The ones with the Made in China Delco lines were better, so I used them, not to bad. Open the right one and there is some wire spring, a banjo bolt rolling around and no crush washers. No big deal, but what was supposed to be in the box/caliper? I started to install and the lower rubber bellows had not been pulled all the way thru. It was a hassle convincing the rubber to go further, without it taking the inner rod with it. It finally worked out. Then went to bleed this one, with the proper flare wrench and it rounded off. It was not the same size as the left either. I convinced a 9mm socket to fit and got it out. I then reused the one from the old caliper. The right took twice as long as the left. None of the mounting bolts would fit, they are just small enough to slip when tightened. They are the right thread, but milled under tolerance. I do hope the inner workings will prove to safe and reliable. These calipers are re-manufactured in Mexico.
Dominic Cliche
Reviewed in Canada on July 20, 2020
Fit à la perfection
Recommended Products
