Your cart is empty.
Your cart is empty.Product Description
Pro Audio Professional Permanent School, Church, Restaurant or Bar Wall Mount PA DJ Speaker Bracket
If you are considering adding PA speakers to a bar, club, church, local community center or school but do not like the bulky look of tripod stands that take up floor space check out our permanent wall mount. The bracket is designed to work with virtually any PA and features a maximum weight capacity of 180 lbs ensuring that even the heaviest speaker is not going anywhere. The mounting pole is compatible with speakers from a 1 ⅜ inches (35mm) to 1.5 inches (38mm) mounting diameter. The adjustable swivel pole mount allows you to angle the speaker at any designed point and the arm extends and contracts to leave plenty of room for large size PA speakers.
ASC-S022 Permanent School, Church, Restaurant or Bar Wall Mount Speaker Bracket
- Allows for up out of the way PA Speaker mounting option
- Heavy duty design with a 180 lbs. max speaker weight
- Depth level adjustments (measured from wall to center of post mount): 13 inches to 8 ½ inches
- Horizontal level tilt angle adjustments: Set to place and tighten the bolt
- Cable ring prevents cables from dangling
ASC-S022 Permanent School, Church, Restaurant or Bar Wall Mount Speaker Bracket
- Wall space needed for mounting area: 19.25 inches tall by 4 inches wide
- Hardware not included but we recommend using lag bolts
- Accommodates all standard speaker post mounts from 1 ⅜ inches (35mm) to 1.5 inches (38mm)
- Heavy duty square tubing thickness: 1.5 inch by 1.5 inch
John hollyrock
Reviewed in the United States on March 16, 2025
Great , love it
Sat
Reviewed in the United States on May 22, 2024
This pair was a real score!!! Great price! My speaker mounts from the manufacturer were gonna cost me several times that price! Seems ideal for both smaller or larger speakers. It's a fully adjustable setup that allows fne-tuning of speaker direction(s) to almosr any angle(s). Note: you'll need to buy the mounting platess separately.(it's so easy, because you mount the speakers to the plate,then lift them up... slide them right over the receiving post, no helper needed! I actually mounted some flat planks cut to my speaker dimensions to the mounting plates (so as to avoid drilling my 3500 dollar speakers) and strapped them in with a nice quality ratchet strap. Safe and secure now! & out of harm's way. I'd see these being heavy duty enough to accommodate almost anything you might want to mount...from big PA to small studio monitors
Just a guy
Reviewed in the United States on April 5, 2024
These are quality speaker hangers. Quality build for the price. My only wish for this item would have been a retaining cable capable for keeping the speakers straight.. I personally impervsed a retaining cable.. overall, plenty of adjustment for left, right, and pitch angle of the speaker. You won't be disappointed with the strength or looks.
Grant Bullington
Reviewed in the United States on December 5, 2023
Mounting branch has weak platform for speaker, brackets/bolts not strong enough to hold it at an angle, and mounting pole is to small for most PA speakers so the speaker has additional tilt. Already ordering a different product.
Ruban
Reviewed in the United States on March 9, 2022
Though the look and designs are really very good, there is a very serious problem. It was a stated by another buyer. There is an adjustable nut and bold just close to where you hook up the speaker. When you place a heavy speaker it is not strong enough to hold. You cannot tighten the nut and bolt either because this is made of square pipe not sufficiently strong for you tighten. End result, you fix on the wall, place the speaker on it, get thoroughly disappointed, because the speaker does not stay there. It is almost falling down. You cannot keep it in that position. Better the manufacturer rectify that defect before you sell anymore product. That is the major problem I found.
ISD 911
Reviewed in the United States on September 30, 2020
They were what I expected them to be. I weigh 180lbs. I tested them with my weight. So, I felt comfortable putting 70lb. speakers on them.
Gearld
Reviewed in the United States on July 10, 2019
Great product
Hitech
Reviewed in the United States on April 16, 2014
At first look these brackets look heavy duty. Upon closer inspection you will see that the metal is fairly light. The Peg end where the Speaker mounts gives you the ability to pivot your speaker at an angle, but this is the weak point of this bracket. There are two adjustment bolts on this end, and when you tighten to hold the position you want to maintain; the Bracket or square tubing begins to crush and will not hold the angle or position you want. There needs to be a steel sleeve bushing inside of those tightening points. The pivot area on the Peg end of this bracket will not safely allow you to hang a speaker above 50 Lbs. without the speaker falling over to one side. Furthermore, this bracket specs. claim 180lb. weight capacity. I placed a 80 lbs. speaker on this bracket with the arm fully extended, you could see the bracket arm stressed and unsafely bowing. 80 lbs. speakers were not stable on these mounts. I ended up using these to mount some lighter weight 40 lbs. after placing a steel sleeve in the adjustment area of the peg that supports the speaker, in order to remedy the pivot problem. besides these brackets; I would recommend having a custom built bracket out of a heavier gauge steel if you want to hang any thing over 50-60 lbs. I had some truly heavy duty 200 lbs. brackets made by a local welder for 80 lbs. speakers for about the same price as these. I would have regretted the purchase if I did not have some lighter speakers to hang up as well.
Recommended Products