Your cart is empty.
Your cart is empty.Product Description
Mike
Reviewed in the United States on April 9, 2025
Perfect match at a reasonable price! Fit my 2004 Ford Ranger
Art Eaton
Reviewed in the United States on November 30, 2024
Bearings had to be forced over the threads. There was no galling or damage to the threads, but they should look into why the nut does not like their threading job. If the threads were cut on a single thread cutter lathe, they should check them with a die.Only maching on the spindle was a tiny bearing landing at each spot. Bearings did not volunteer to slide right on. Tinware/brake dust cover holes not tapped, but those might be intended for self-tappers, thus that being a hinky Ford thing only.Bearings got hot for a while with the new spindle. Seem to have worn in now. No, I did not over-tighten the hub nut.
José de Jesús torres reyes
Reviewed in Mexico on July 11, 2023
Muy buen producto excelentes meteriales quedó perfecto
Thumpers3D
Reviewed in the United States on November 18, 2023
This product will fit the truck but the stock bearing are not compatible with it. I bought timken bearing and seal for it and the inner bearing is to small but fits stock ford part perfectly. so not sure the bearing but beware if you purchase it make sure you know what bearing will fit onto it....( these are the old bearings just to show where it hits)
Recommended Products
$247.69
$ 99 .00 $99.00