Your cart is empty.
Your cart is empty.Product Description
Taillight + Turn Signals fits for Harley V-ROD Night Rod Street Rod 2002-2011
Fitment: Fit for Harley V-ROD, Night Rod, Street Rod 2002-2011
Condition: Brand New Quantity: 1 Lense Color: Clear
Enhance the look with these Multi LED Tail Light with integrated Turn Signals (you can remove your rear turn signals)
This unit will give you ALL your current functions PLUS turn signals.
Perfect Quality unit - Will not fog up or accumulate moisture.
Very nice, BRIGHT and therefore - SAFE upgrade for your rear lighting!
E-Mark certified to the highest European standards
ryan
Reviewed in the United States on June 6, 2024
The light works great but there are no instructions on how to hook this up. Here is quick explanation of the wiring. My bike is an 07 night rod special so I will be speaking on that model. This is an install in the U.S.Once you remove the rear seat and get to the wires on the motorcycle. Cut the wires going to the turn signals and rear light. This should include a purple wire and black wire for each turn signal. For the wires going to the original rear light, the wires should include a blue wire, a black wire, and a red/yellow wire.For the wires coming from the new rear light, there should be two yellow/black wires, a green wire, a black wire and a red wire.splice the yellow/black wires from the new tail light to the corresponding left and right purple wires that did go to the old turn signals. Then two remaining black wires that went to the old turn signals splice them together.Then, take the black wire going to the old tail light and splice it to the new black wire coming from the new taillight. Then take the old blue wire and splice it to the new solid red wire. Then take the last remaining wires which should be the old red/yellow wire and splice it to the new green wire.Hope this helps
Cam
Reviewed in the United States on March 24, 2024
Easy to install and works fine then a little over a year later I get off the bike and notice that my taillight is extra bright. Reason being the black outer cover apparently was blown off in the wind.
Miskeuei
Reviewed in the United States on April 29, 2024
love them
David a.
Reviewed in the United States on May 25, 2023
This is not wired properly for a Harley V-Rod and does not work and comes with no instructions and could not find any on on the internet do not buy this crap.
AZ-Buyer
Reviewed in the United States on April 2, 2023
I grew tired of the dealership swapping out the old fashioned bulb whenever it burned out. This LED will be much more durable. Looks better too.
samdprnc
Reviewed in the United States on January 9, 2021
2008 HD night rod specialPerfect for getting rid of the license plate bracket /turn signals.*installation instructionsTake off rear seat (2 nuts) , remove 6 bolts from rear fender, then remove the tag bracket and cut the wires leaving the harness in tact for future removal without having to cut wires. Splice all grounds together (2 black wires) , remove factory bulb & plug in new brake light and splice each turn signal separately (purple wires) on corresponding sides. You wont need license plate wires (2 gray wires) You will not need resistor (plug in thing it comes with) if you have stock (non led) front turnsignals .
ryan
Reviewed in the United States on January 13, 2019
This was a really nice product other the. The opening in the back were the wires come out its about quarter size with no plug. I have to fill it with silicone to make it waterproof
James S Edy
Reviewed in the United States on May 31, 2018
The light has no instructions but if you can figure out 2 wires you don't have to be a genius. It fits loose but use some silicon and your waterproof. Looks great and very bright.
Levesque
Reviewed in Canada on December 6, 2018
S'adapte bien !
Frederic O.
Reviewed in Canada on June 3, 2017
Vert good for the price
Recommended Products