Your cart is empty.
Your cart is empty.Product Description
AUXITO 7440 7443 7440A 7444NA LED Bulbs Amber Yellow
- Super Bright: Adopts 54pcs led chips, only consume 1/4 of the power, but 400%+ brighter than dim halogen bulbs
- Plug and Play: Non-polarity design, directly fit for 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7444NA, etc socket
- Longer Lifespan: Built in Intelligent IC driver for better stable current performance and heat dissipation for longer lifespan
Kindly Note:
- 50W 6-ohm load resistors/flash relay may be required to avoid the error code or hyper flash issue
- If you have any questions of these or your order, please let us know or leave a question in 'Customer questions & answers'
Product Specification
- Color: Amber Yellow
- Working Voltage: DC9V-16V (Fits 12V Vehicles)
- Current: 0.45A
- LED Chip Type: 54pcs 4014SMD
- Package Includes: 2 x 7440 Amber Bulbs
- Application: Turn Signal Lights, Blinker Bulbs, Parking Lights, etc
Why Do We Choose AUXITO 7440 7443 Amber Yellow LED Bulbs?
If You Don't Know the Correct Size You Need, Pls See Here!
Note:
- If you have a stock halogen bulb, you can refer the method 1, method 2 and method 3 to find out the correct part number you need.
- If you have aftermarket light, bulb fitment guide may not accurate, you can refer the method 3 to find out the correct part number you need.
- The "Note/!" is very important, it will tell you the applicable position, pls refer to it when using the fitment. For example, "Note: Fit for Brake/Front Signal/Rean Turn Signal/Tail light.", it means the led bulbs only fit for these lights, if you want a reverse light, the led bulbs won't fit.
- If any questions, or meet any issues of the order, please let us know or ask it in 'Customer questions & answers'.
Christina
Reviewed in the United States on January 31, 2023
Very Bright! Leaving the “Easy to Install” at 5 Stars even though it was very difficult to get this into my headlight assembly, however my assembly is VERY small.
Tyler Hinnant
Reviewed in the United States on August 13, 2022
2018 Chevy Colorado application for my purchase, will require resistor/decoder due to hyper flash symptom.
HM
Reviewed in the United States on July 8, 2022
This is an awesome and bright turn lamp bulb except that it hyper flashes on my ‘21 Pilot.I’m not going to invest in a resistor though so ended up returning it right away.I didn’t plan on doing more than plug n play for this, so I am disappointed.
Daniel breban
Reviewed in the United States on June 28, 2022
The media could not be loaded.
[mb]
Reviewed in the United States on June 22, 2022
Attempt to replace flasher/DLR lamp on Fiat 500c1. too bright for flasher, plus it triggers faulty bulb warning on dash.2. with day light running lamp, it flickers terribly, like fast strobe light.3. with Headlight on, the DLR suppose to dim, this one does not.
erick corza
Reviewed in the United States on May 26, 2022
I put these one my 03 civic si hatch and can proudly say that these are the brightest lights I have ever put on this car, would definitely recommend to others!
Wes Banks
Reviewed in the United States on May 21, 2022
Bulbs are very bright and work great on my 2018 Subaru Crosstrek. I did have to use resistors to stop hyper flashing though. Bulbs are definitely a great buy though.
Engineer's opinion
Reviewed in the United States on October 18, 2022
I have a 2017 Fiat 500e (all electric car with a short range battery) and I am trying to find LED bulbs to save as much electricity as I can, also, I like the brightness.Pros:1) these are brighter than stock. Fine for front signal lights, probably fine for back signal lights.2) they run cool because they DON'T have BUILT IN LOAD RESISTOR CIRCUITRY/CANBUS decoder. LEDs DO NOT like heat so I suspect these will last longer than bulbs with built-in CANBUS decoder circuitry that run MUCH hotter.3) the power draw measured at 3.01W, compared to my stock incandescent bulbs which measured at 19.35W. One could also say that these run at 16% of the power of the stock bulbs, or, GREAT power savings!Cons:1) these DO NOT trick the CANBUS on my FIAT so they will need an additional LOAD RESISTOR or load resistor circuitry/CANBUS decoder. That is a big deal to me because I don't want to damage my factory wiring connecting a load resistor. Also, load resistors use all the power I am trying to save with LED lights.Conclusion:If you have an old car without a CANBUS system then these may be perfect for you. If you don't care about power consumption and want an LED that will run cool with an exterior load resistor, then these may be great for you. If you have a CANBUS and you don't want to modify your stock wiring, then you may want to stick with the old faithful, albeit dimmer, incandescent bulbs.STAY IN TUNE:I am performing a test of various small, high resistance, load resistors that I simply place across the leads of the bulb base to trick the CANBUS. So far I've tried 100 kilo-ohm, 50 kilo-ohm, and 1 kilo-ohm resistors across the leads and they did not work. I will be trying a 150 ohm resistor next, if that works, the total power draw will be raised by about 1W, for a total of 4W power draw, or 20% of stock power. Still a pretty good savings....
Recommended Products
$29.86
$ 15 .99 $15.99