Your cart is empty.
Your cart is empty.Product Description
C26-2 Trimmer Head
- Replaces OEM Parts:
- C26-2
- 4002 710 2169
[Arbor Size]:
- 10mm x 1.0 Left Hand Thread
[Trimmer Head Type]:
- Bump & Feed
- Nylon Line is Fed Automatically by Tap Action
- Easily Loads by Inserting Line Into Eyelets and Twisting The Knob
[Trimmer Line]:
- Can Use .080", .095", or .105" Diameter Line
- Double Line for Trimming and Mowing
- Suitable for Lawn Trimming, Around Trees, Between Shrubs Along Edges, Walls and Fences
[Fits the Following Stihl Models]:
- FS44, FS55, FS55R, FS56 (2008 On), FS56R, FS56RC
- FS70, FS70R, FS74, FS76, FS80 (1996 On), FS80R, FS83
- FS85, FS85R, FS87, FS87R, FS90 (2005 On), FS90R
- FS91, FS91R, FS94, FS94R, FS100, FS100R, FS100RX
- FS110, FS110R, FS111RX, FS120, FS120R, FS130, FS130R, FS131, FS131R
- FS200 (1997 On), FS200R, FS240, FS240R, FS250, FS250R, FS260R, FS460R (2011 On)
- FR85, FR85T, FR106, FR108, FR130T, FR220, FR350, FR410, FR450, FR460, FR480
- KM55, KM55R, KM56, KM56R, KM85, KM85R, KM90, KM90R, KM94
- KM100, KM100R, KM110, KM110R, KM120, KM130, KM130R
- KA85, KA85R, KR85, FS-KM, FSA90R, FSA130R, FSA135, FSA135R
How to Install
Step 01
Step 02
Step 03
Step 04
Hector Lopez Jr
Reviewed in the United States on April 20, 2025
Perfect fit for Sthil KM 56
D. B.
Reviewed in the United States on April 12, 2025
Dont buy.....parts missing from pkg.......bate and switch.......couldn't get a mechanic to get it installed.....said it would fit the FS-50....cant get it returned.....
amazon buyer
Reviewed in the United States on September 28, 2024
I loved how easy it went in.The construction is solid.I'd dare say it may be better than the original.I did notice that it felt heavier than the original head.
Jake
Reviewed in the United States on July 10, 2024
The head is easily threaded to the trimmer and restringing is a breeze. The head works great and the tapping easily releases additional string length. 100% satisfied even though I’m a fussy guy when it comes to tools.
Pat
Reviewed in the United States on June 1, 2024
Much better than the stock Stihl head. Easy to install, easy to load new line, and the bump feed actually works! Game changer!
Robert J.
Reviewed in the United States on November 27, 2024
This we need our head fit perfectly on my weedeater
Vrock
Reviewed in the United States on May 4, 2023
This bump head works fine, however it is approximately a 1/2 pound heavier than the stock Stihl bump head, based on my not calibrated scale. If weight is an issue then consider rebuilding the stock one. Also this bump head isn't as easy to wind the string as would be expected. You have to push the spool inward while turning. I found that using the palm of my hand to be easiest. I also have an Echo speedfeed 450 that is much easier to wind the string.
TYME
Reviewed in the United States on August 15, 2022
I use this head on my fs131 and it seems to be pretty tough. I had a little trouble with reloading it at first for the hole had to be drilled out a bit to get my square .95 string in and it didn’t want to hold in the holding holes before I actually was to put it back on. Idk if it was just me or what but after about four reloads it did start staying put while preparing to load it. I didn’t care for it at first but by the time I had got it to take hold and figured out exactly how to load it back into the cover it wasn’t that hard. It could come with instructions of the best way to do so. I know that they all pretty much work the same way but this one has to be laid in just right to be hassle free, u can do it without figuring it out but it’ll make u want to throw it in the creek first. I still think for the 20$ tag and the durability of the bumper it is worth it.
Recommended Products