Your cart is empty.
Your cart is empty.Category 2 Hydraulic Top link with double piloted check valve prevents cylinder drift and holds cylinder in position. This feature makes this hydraulic top link one of the best on the market! Cylinder Specifications Include:Features:Category 2;Double Piloted;Check Valve;1" Pin Hole;Ports 3/8" BSP (Includes BSP Male to NPT Male);21-5/8" MinimumLength;DoubleActingCylinder;32-11/16" Maximum Length;High Quality Chrome Plated & Polished Rod;2" CylinderBore;Honed & Finished Steel Tube;1-3/16" Rod DiameterlTop Quality Seals;11-1/16" Stroke;Pressure Tested;2" Ball Widthl1 Year Warranty;Pushing Capacity: 6700 lbs, Lifting Capacity, 4300 lbs. (Note: The two measurements are general guidelines calculated on a working pressure of 2175 PSI) **Standard Color is Graphite for this particular item.
Customer
Reviewed in the United States on May 13, 2023
Works well with my Mahindra 6000 after a cat 1-2 top link bushing for the pin that hooks to the tractor
Dana Smith
Reviewed in the United States on August 15, 2022
I needed a hydraulic top link to replace my hand screwed one. Works great for my box blade
Charlie Arehart
Reviewed in the United States on November 28, 2022
As others have said, both the toplink and the recommended hoses just work and seem well-built. I waited a year to offer a review. No problems, so far, on my Mahindra 6119 (59 hp Cat 2).
D Simpson
Reviewed in the United States on August 27, 2021
Right out of the box, the inlet and outlet ports were clogged completely with what appeared to be hard black crud of some type. Took it to a local hydraulic shop where they were unable to clear it and unable to make any fluid pass though it. It is hard for me to believe that the part was "tested" as the seller advertises.
BMR
Reviewed in the United States on May 31, 2021
Bought this cylinder along with the pair of hoses (same seller) for my new Kubota L6060. As a few others mentioned the width of the “eye” on the tractor side is a little wide for Cat 1/2 hookups like on the kubota grand L series. 5 minutes with a grinder shaved off 1/4” on one side and it slid right in. I used an additional thin reducer (cat 2 to cat 1) bushing to make so for a snug fit at the tractor attachment. The cylinder and hoses seem to be good quality.Held my bush hog up overnight with no leak down.If they made a lift arm cylinder / hose kit I’d be all over it.
David Chambless
Reviewed in the United States on March 24, 2021
1st, the chinks painted the swivel balls in both ends and I found them stuck. Also, the holes the hose fittings go into are too close to use a swivel elbow, screw in one and the other won't pass it. Just silly unnecessary untested stuff that would be easy to correct, if you speak Chinese.....
Ozark Chris
Reviewed in the United States on April 6, 2021
When I ordered this item I also ordered the hose kit. Unfortunately, when the package arrived the hoses weren't inside the box - the packing slip showed I'd ordered it and it didn't show a backorder. I called the # on the packing list and spoke with a really charming lady - sorry I can't recall her name - and told her what had happened. She took my phone # and said she'd look it up and be back to me in a few minutes - I expected 10-15 minutes - she called back within 5 minutes stating they would have the hoses out that day (and they did!). So I would seriously and highly recommend Brook AG to anyone requiring any AG related parts!Hydraulic top link appears to be very high quality, rugged and built very well. I did have to grind down the ears of the bushing on the implement side to fit all of my different implements as it is just a hair over 2" and my narrowest item (a cat 1 box grader) is only ~1 15/16. Easily done with a grinder in just a few strokes.The entire package - top link, hoses and some cat1 to cat2 bushings (purchased @ tsc) ran a bit over $350 but I believe it is well worth it for the quality that appears to be apparent in the link & hoses.Although this review is about the top link, I'm going to include the hoses down here at the bottom so you don't have to look it up.These hoses look to be very well built, came protected on both ends with either caps or screw covers. One hose has a right angle extended swivel end and the other a standard banjo end allowing a very nice transition and routing of the hoses. Length is right around 3 foot for each hose and for my application it is fine (enough room for a loop between the top link and the QC ag connectors on the remotes). I'm a bit old school and don't like Teflon tape with hydraulics so I used blue paste (No, Not locktight) that resists vibration. Great hoses and would highly recommend purchasing these if you get one of these Italian top links - the frustratration & trips to the hardware store that might follow by using the npt adapters isn't worth the $60 for the set (imo).
Charlie
Reviewed in the United States on September 4, 2019
nice. takes a little getting use to. but, when use to it. nice to have. do not have to get off tractor to readjust.
Recommended Products
$179.09
$ 83 .99 $83.99