Your cart is empty.
Your cart is empty.Product Description
Parameter
- Number of actuators: 3
- Adjustment screw thread: 100 TPI
- Adjustments : z, θx, θy
- Actuator Locks : Yes
- Mirror Diameter：25mm Lens
- Used for Lens : Diameter18mm (Nozzle) FL 38.1(Nozzle)
- Used for Lens : Diameter20mm FL 50.8/63.5/101.6mm
Features
Set A
- Aluminum Material With Black Oxide Coating
- Adjustable lnstallation Hole Of Mirror Mounts
- Integrative Fixture Laser Head With Air Assist Nozzle
Package List
- 1 pcs C Series Head
- 1 pcs 1st Mirror Mount
- 1 pcs 2nd Mirror Mount
- 1 pcs USA CVD ZnSe Focus Lens(D20 FL50.8)
- 3 pcs Si Mirror(D25)
Various Focal Length Adaptation
1.5-inch lens
- Optional lens for high resolution engraving.
- Recommended for raster engraving above 600 DPI resolutions.
- Recommended for small font or fine detail engraving.
- Produces spot size of 0.003 to 0.0065 inches in diameter.
- Good cutting lens for thin (less than 1/16 inch) material.
2-inch/2.5-inch lens
- Standard lens on most laser systems.
- Multipurpose for both engraving and cutting applications.
- Recommended for raster engraving from 300 DPI to 600 DPI resolutions.
- Produces spot size of 0.004 to 0.007 inches in diameter.
4-inch lens
- Produces focused beam over longer vertical distance
- Specialty lens typically used for engraving within recessed area (bowl or plate).
- Used for cutting thick materials.
Superior Adjustability
CO2 Laser Head
1st Mirror Mount
2nd Mirror Mount
R B
Reviewed in the United States on May 29, 2023
The mirror mounts and lens mounts are really good, The alignment plate with a round hole on the first mirror was metal instead of aluminum as in the second mirror and it was bent and drilled wrong so it didn't mount at 45 degrees and the center of the hole didn't align to the center of the mirror, which made laser alignment more difficult than it should be.I had to take the one from second mirror and install it on the first to align the first, then take it from the first and reinstall it on the second to align the second mirror.Wasted too much time unnecessarily.
Customer
Reviewed in Canada on March 7, 2021
This product is really well built and makes the entire procedure of alignment so much easier.
A Partent
Reviewed in the United States on September 23, 2020
I have an older Fabool 40w CO2 laser that I have been in the process of upgrading to a 100w laser. As par of the upgrade, I decided to replace all mirror mounts and the laser head. While the Fabool provided equipment was adequate, the mountings and only being able to alien the mirrors with 2 screws was not really working for me.Although I had to make some modifications to this Cloudray set (the mounting of the laser head), I am very pleased with the quality of this product and I would recommend it to anyone looking to do an upgrade.
Sergio A.
Reviewed in the United States on December 2, 2020
De muy buen material.. y ajustable
Weird One
Reviewed in the United States on April 28, 2020
Didn't get head, mirrors, and lens
William
Reviewed in the United States on April 25, 2018
Great service. One of the screws was bad and they sent a new one from China which only took 5 days to get here. The quality of the laser head is good for the price but the mirrors kinda suck. Still well worth the price.
Recommended Products