Your cart is empty.
Your cart is empty.Features: 360 degree bending at will, simple installation, cutting. Specifications: Material: Silica Gel Specification: length 39inch/66inch/72inch height 1.97" and width 1.38" Installation steps: Step 1: Clean up the water and dust on the ground. Step 2: Determine the installation position of the water retaining strip and mark it on the ground with a pen. Step 3: Tear off the back glue and stick the water retaining strip to the ground in the marked position. Step 4: Sealant on the contact position between the two ends of the water retaining strip and the wall. Step 5: Sealant is applied on both sides of the water retaining strip, which can be used in 24 hours. Note: Sealants are not included and need to be purchased separately. Red backing glue and water retaining strip are separated and need to be affixed by yourself. Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement. Package Includes： 1 x Water barrier
Agripino
Reviewed in the United States on January 31, 2025
Es muy pequen̈o yla pega no es tan Puerto
Delighted
Reviewed in the United States on July 4, 2024
Saw this on Amazon and thought it was the perfect answer to our walk-in shower problem. Unable to install sliding shower doors and saw this product could be the answer to our problem. It arrived early and I was able to install it in a few minutes. I caulked around the ends and front/rear edges. We also purchased a medium weight shower liner and as of today, we are very happy with the product. Follow the instructions and you should have no problem. Hope this helps and Happy 4th of July America!
Taylor
Reviewed in the United States on December 2, 2024
I applied it to a sterile aluminum surface and yet the adhesive that it comes with was not ideal. It was probably a 7 out of 10 on the stick level.Luckily I had some 3m foam adhesive tape which I used and that greatly improved the product. It also elevated the shower dam which made for a more ideal caulking joint.
MB
Reviewed in the United States on November 21, 2024
This sticks really well and keeps the water off the floor very well! Works perfect for our needs and isn't too tall.
Summer Hater
Reviewed in the United States on July 9, 2023
When I ditched the horrible shower doors for expanding curtain rod, I was worried about leaking. Turns out the curtain was long enough to go inside shower enclosure and I didn't need this, but it's super easy to use, and cuts with scissors to adjust length.
iEmon
Reviewed in the United States on March 29, 2022
Expensive product with bad quality adhesive and controls. Didn’t long for a day before starting to come out. Followed the instructions properly but results was demoralizing. If I knew I would have bought better items (you could use ceramic bars with glue which would’ve been much cheaper choice). Highly not recommended
Melissa Dickson
Reviewed in the United States on February 4, 2021
Very durable, easy to install and looks nice. Haven’t had water outside the shower since this was installed. Wish I had found this long ago. We did use white caulking along the length on both sides of this strip for added protection although it did stick well. Also had to trim ends to fit the curve of our shower walls so caulked to fill in any possible leak spots. Easy to cut. The caulking just looks like part of the strip.
Debbie Darling
Reviewed in the United States on April 22, 2021
I just needed help for controlling splash and didn’t want a huge barrier. This isn’t so rigid that if your arm crosses it it would hurt. It feels strong & pliable. You do need to chalk I think to protect the adhesion but that doesn’t cause any issues.I would buy again for what my purpose was.
Recommended Products
