Your cart is empty.
Your cart is empty.Imagine a ball mount that requires no tools and no trailer ball torqueing for installation. In fact, it requires no trailer ball installation at all. Simply insert the shank into your trailer hitch receiver, secure it with a pin and clip and you are ready to tow. Now imagine that same ball mount with a sleek, modern look in a popular European design. CURT introduces our new line of Euro Mount ball mounts. Designed to replace a common, old-style ball mount, each CURT Euro Mount is faster and easier to install with its permanently installed trailer ball. With the tow ball permanently fixed to the shank, the ball can never come loose and can never be stolen, making the Euro Mount ball mount very secure. The unique European design was created for the U.S. market, combining form, function and aesthetics. CURT Euro Mounts come with a 1-1/4" x 1-1/4" shank and can tow up to 3,500 lbs. of gross trailer weight and 350 lbs. of tongue weight, making them the perfect choice for all light-duty towing. They are ideal for towing basic utility trailers, small boat trailers and canoe haulers, popup campers and small recreational vehicle trailers for dirt bikes and smaller ATVs (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). This CURT Euro Mount comes with a 2" diameter trailer ball, a length of 11-1/4" and a ball height of 5-1/8". To give it an added edge over other light-duty ball mounts, this Euro Mount comes with a durable black carbide powder coat for superior corrosion and scratch resistance.
Xan Man
Reviewed in the United States on April 29, 2025
After struggling to find a Class II Hitch with a 2-inch ball, I searched EVERYWHERE to find one that had a big enough rise because the hitch I installed on my 2012 Lexus ES350 is quite low. A Class II hitch typically has a 1.25-inch shank and a lower weight capacity of around 3,500 lbs, which works well for smaller vehicles but doesn't match the wider compatibility of Class III hitches, which come with a 2-inch shank and a weight capacity closer to 6,000 lbs. To bridge the gap, I initially tried an adapter from Home Depot to convert my Class II to a Class III, but the fit wasn’t perfect—it stuck out too far, leaned slightly downward, and unfortunately scraped on driveways.Then came this Euro Hitch and it was exactly what I needed! Unlike the bulky adapter setup, this hitch sits at the perfect distance from my car, so there’s no risk of hitting the bumper. I also love the smart design—instead of a rigid 90-degree angle, the hitch is split into two 45-degree angles, making it far less likely to scrape on driveways.The build quality is excellent; Solid, sturdy, and not loose at all. It’s really easy to install. It also looks great with its black-on-silver finish and, despite some heavy rainfall, I’ve noticed zero rust so far. Overall, this hitch is definitely worth the money and has made towing effortless. If you're looking for a hitch that solves the common scraping issues and fits beautifully on a sedan like the Lexus ES350, this is the one to get!
Ben
Reviewed in the United States on April 27, 2025
Very well made.
Rob
Reviewed in the United States on August 6, 2024
Gets it done, light weight, looks great. If I need a different ball size I’d grab another one of these for sure.
dad
Reviewed in the United States on July 13, 2024
guess what? I bought it to pull a trailer and it worked!!
Johnathan McLaughlin
Reviewed in the United States on June 28, 2024
The size it shows in the pictures shows it from the end of the hitch to the farthest end of the ball. However, the measurement it lists is actually from the pin hole to the center of the ball. I suspected that's what it should have been but that's not what the picture shows. As a result I purchased one that was too long. However, it seems to be a really nice and quality ball mount assembly.
Scott Newcomer
Reviewed in the United States on June 23, 2024
This arm mounts nicely into the receiver. Then the arm follows the curves of the exhaust system so I don’t feel I need to remove it when going trail riding.The only question is whether it would hold up if I had to wrap a cable around it to pull me out of the mud or visa versa
EchoEric
Reviewed in the United States on May 9, 2024
Got this to use with factory ID4 hitch. Well made and get the ball around the standard 18” inches high. Used to pull a 5x10 aluminum trailer with 1600lbs load on it. Worked nice.Keeps with the cars European look.
kent swanson
Reviewed in the United States on October 22, 2024
it worked perfectly. towed a small trailer behind my compact car with ease.very nice piece which stows away easily when not in use
Customer
Reviewed in Canada on June 13, 2023
As advertised. Good for keeping load’s level on smaller suv/cuv
Jérome Lamontagne
Reviewed in Canada on June 9, 2022
Mauvaise dimension14’’ de long au total+ 5 1/8 sous la boule
Xueqiang Dong
Reviewed in Canada on November 22, 2022
not great, not bad also
Alfredo D.
Reviewed in Mexico on May 19, 2021
Muy buena calidad!
Georgiy
Reviewed in Canada on August 20, 2019
Works great looks great
Recommended Products
