Your cart is empty.
Your cart is empty.This Fender Roller is designed to slowly ease the wheel arch away allowing for larger wheels to be fitted. You may need to do so when upgrading to a larger tire, wheel, or even the addition of fender flares. Increase tire to wing clearance, flare arches or repair wheel arch collision damage with this professional reforming tool. It bolts directly to the hub flange, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs.
David Mercer
Reviewed in the United States on May 22, 2025
Great size and looks
Nick Garapolo
Reviewed in the United States on March 24, 2025
Easy installed
William
Reviewed in the United States on March 15, 2025
Does not fit long bed 8ft modeland body lines are a lil off so there will be a small gap at top of fender
Customer
Reviewed in Canada on February 17, 2025
très satisfait
Ericelio Dasilva
Reviewed in the United States on January 22, 2025
great quality product!
Me encantó es muy útil, estoy enemorada
Reviewed in the United States on July 20, 2024
Es muy útil 😍😍
Raptere
Reviewed in the United States on October 24, 2024
It got the job done. Design seems to be the exact same as the higher cost options. One thing that was a problem was the main nylon locking nut at the end of the screw, kept unscrewing itself when adjusting the tool, so I just applied some red Loctite to that, and the problem went away. I did thoroughly clean, and grease all moving parts. The key to using this is to use enough heat in the fender, just enough for it to be uncomfortable to keep your bare hand on, then keep going slowly, I only went a half turn of the screw at a time and went back and forth at each point about 4-6 times.
Nathan Tower
Reviewed in Canada on January 24, 2024
Very easy to install
Matt Gionette
Reviewed in Canada on February 2, 2023
Not a great fit but with some prying around and pushing it worked out. Had to go outside the instructions to secure them to the truck. Bought some self taping screws to succeed. Looks good after the extra work
Mbeazzy
Reviewed in the United States on October 17, 2023
These fender flares are actually pretty good quality. The instructions are junk, but you will be able to figure out the install yourself. I ended up drilling a few holes per wheel well and shot extra rivets in them to suck up the gaps. Would recommend!
Levi Heitrich
Reviewed in Canada on April 20, 2023
Bought then for a 2007 ram 2500.. they don't line up and don't fit the body line in the front or rear.
christina vaux
Reviewed in Canada on April 22, 2021
Sure made old truck look like new again.
Recommended Products
