Your cart is empty.
Your cart is empty.pablo r.
Reviewed in the United States on January 3, 2023
Timing belt is missing the marks for easy I nstalation
WildArmadillo
Reviewed in the United States on May 13, 2020
I am changing this review. I installed this timing belt set and i had a few issues. The seals included with the kit are not even close to the right size, but even worse than that, the snout on the water pump is 2mm too large to go into my fan. This is not the right water pump. I am going to have to grind the snout down to be able to finish the job. Almost done and at the end i discover the part isn't within tolerances!
snusink
Reviewed in the United States on September 27, 2019
Good quality everything fit except if your vehicle is older the fan hub is a bit large so you have to file a bit.
Kindle Customer
Reviewed in the United States on October 31, 2019
I guess you get what you pay for. American company but all the parts are made in China. No marks on the timing belt to assist during installation (Gates belts do have this feature).So I go to all the length of fitting the water pump and re-assembly up to the point of fitting the thermo-coupled fan assembly - a lot of work, only to find that the shaft of the new pump is oversize enough to prevent installing the pulley, sorted that by enlarging the hole in the pulley by perhaps 10 thou.......next problem was where the shaft of the pump fits into the boss of the fan assembly.......not so easy to enlarge this but again increased the diameter of the hole in the boss by about 10 thou. Had there not been so much work involved I would have returned this kit.......now I'm just worried about the longevity of the parts and are they up to snuff.I can assure you that all parts that this kit interfaces with are standard Nissan and not the cause of this problem. This is the second water pump assembly that I have fitted to this vehicle and no problems experienced with the last kit. This is a tolerance issue with the Chinese manufacturer.
Customer
Reviewed in the United States on March 21, 2018
Water pump seems to work fine, the only problem is that the snout on the front of the pump is too large to fit the pulley and fan back on. The hole in the pulley can be filed out to fit but the fan can not.
Recommended Products