Your cart is empty.
Your cart is empty.This suspension subframe bushing kit is designed to match the original hardware required to repair the subframe to restore ride control on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chrysler 300M: 1999, 2000, 2001, 2002, 2003, 2004] - [Chrysler Concorde: 1998, 1999, 2000, 2001, 2002, 2003, 2004] - [Chrysler LHS: 1999, 2000, 2001] - [Dodge Intrepid: 1998, 1999, 2000, 2001, 2002, 2003, 2004]
Rudy
Reviewed in Mexico on March 26, 2024
Quedaron al 100 por ciento bien son la medida exacta y los tornillos los hules son de calidad máxima gracias a los transportistas y al proveedor que me ayudaron a conseguir ese material y gracias a Amazon por su calidad servicio y precisión ❤️🙏🏻
Ice
Reviewed in the United States on November 5, 2024
Me gusta la calidad.
Jeffrey Limone
Reviewed in the United States on January 19, 2023
Great replacement
ricky jenkins
Reviewed in the United States on October 20, 2021
Ordered two sets, one set was lost in mail but Amazon replaced. Product worked as should
C. B.
Reviewed in the United States on July 21, 2017
Perfect fit, 2000 LHS (keep in mind this kit is for ONE corner (Front or back) hence 2 bolts - so 4 kits needed to replace all 4 corners (and 4 bolts left over).Super easy job to do as long as the captive nut doesn't break loose or strip. Took less than 20 minutes a side to do a front and back. Saved hundreds of dollars I am sure. Just need a 2ft 1/2" breaker bar, 18mm 6 sided socket, a floor jack and one jack stand a long pry bar. There is a great video on youtube by Harley Mike and it was just as easy as the video.
Dan
Reviewed in the United States on May 30, 2016
Easy bolt on replacement
GIO
Reviewed in the United States on August 24, 2015
Fits my 2008 dodge intrepid subframe perfect.
Ben B
Reviewed in the United States on May 11, 2015
Worked great, nice that it includes both the bolts for front and rear install.
deus402
Reviewed in the United States on March 12, 2012
Comes with both length bolts so it will work to replace either the front or rear subframe bushings. A total of 4 are needed to replace all of them. Very easy job, just place a jack under the front of the subframe, remove both front bolts, let the jack down 1"-2" to replace the bushings, jack the subframe back up, then replace the bolts. repeat for the rear. The only problem you can run into is if you live in the rust belt the nut retainers in the frame like to break, then you get to have fun with a torch and no good access to replace the nut, which isn't even available through the dealer.
Recommended Products
$103.99
$ 41 .99 $41.99