Shopping Cart

Your cart is empty.

Your cart is empty.

Fender Parts Bridge Assy Non Tremolo

Free shipping on orders over $29.99

$18.97

$ 7 .99 $7.99

In Stock

About this item

  • Model# 006-0068-000


6-Saddle Hardtail Classic/Standard Series Bridge Assembly (Chrome)


Ernest r Escamilla
Reviewed in the United States on February 10, 2025
Nice bridge real fender park , ( made in Mexico )
Emg
Reviewed in the United States on July 23, 2023
I bought these to fix an intonation problem with a tremelo type bridge. I only needed the saddles, so for 20 bucks I wasn't loosing much if they didn't work. The OEM fender tremelo saddles priced at around 60 bucks, had inconsistencies in regard to how they were made. The area of the saddles where the strings pass over them had a raised ripple in the bent bar stock used in production and caused intonation to be impossible. My father, who is a guitar builder discovered this with a magnifying glass after a lot of trial and error on my part over more time than i appreciate. The string spacing was the same at 1/16" so I thought I would give these a try. They are heavier and longer than the ones being replaced (only by a few millimeters) but I didnt know that until I received them as the description is sparse. In spite of the differences these saddles did fix my issue and this Amercan made Fender Stratocaster will tune and stay that way even when using the tremolo bar. Many have said it and now I will say it too...the largest guitar maker in the world needs to get thier QC/QA issues under control. People like me who have supported this guitar maker (for 30 plus years) deserve better quality. If they don't get a grip their customers will go somewhere else. I spent a hundred hours going over every inch of a beautiful instrument just to get it to tune up properly. I won't do that again and will return it instead. And, who would have thought that telecaster saddles would fix a stratocaster...the irony is not lost on me. The fact that this long shot worked is unexpected and quite honestly, very wrong. Thanks to my dad for figuring this out...as many guitarists and builders/artists know, tuning issues are sometimes hard to diagnose and sometimes, there is no solution due to bad quality. It's a shame that $500 to $1000 guitars made in Inonesia, Phillipines, Japan (Japan is making the best guitars in the world right now) and even China are made better and have more features than a $2400 guitar made in USA. That's my rant! Hope you enjoyed it!
Tb5
Reviewed in the United States on November 9, 2023
Fit and works well
MR A T BUTCHER
Reviewed in the United Kingdom on July 10, 2020
Hardtail strat, worked perfectly.
Dave
Reviewed in the United States on December 31, 2020
Typical Fender made in Taiwan quality. The 50’s bent steel saddles are what they are. It did not fit my project but I hope the pictures help others avoid my mistake. Fender Part Number 0060068000
Jay jr
Reviewed in the United States on March 31, 2019
The media could not be loaded.
Tarik
Reviewed in Germany on January 7, 2019
Ich hab mir diese Bridge geholt für eine Strat an der ich etwas rum schraube.Lasst euch vom Hersteller nicht täuschen, das Produkt hat alles andere als Fender Qualität.Die Sattel lassen sich mit den gängigen Sechskantschlüsseln nicht einstellen, passende werden aber nicht mitgeliefert, genauso wie dazugehörige Schrauben.Nach langem Suchen und Probieren hab ich eine Alternative zum Sechskantschlüssel gefunden und muss sagen,die Sattel sind sehr schwergängig und lassen sich nur schwer bewegen/verstellen.Aber was am schlimmsten ist dass die Höhe der Sattel sich nach nicht all zu langer Zeit wieder verstellt, was dazu führt dass die Gitarre immer wieder neu eingestellt werden muss was viel Zeit und Nerven kostet.Für das Geld gibt es eindeutig bessere Hardtail-Bridges , im nachhinein war meine vorherige selbst deutlich besser, ich habe mich leider von der coolen Optik und dem Markennamen täuschen lassen.
Customer
Reviewed in Canada on September 29, 2018
The screws in the saddles cant be adjusted. I tried 0.05 hex key that fits my other guitars bridges. The saddles are too low, they just lay on fretboard with a lot of buzz. I triee to swap the saddle screws but normal size wont fit. So I cant adjust high enough. Theres also no string guide on saddles. Will not order again. Saddles also do not line up, they seem to cover the holes of the strings.
J Becker
Reviewed in the United States on November 5, 2017
Well, I bought this bridge just to use the saddles, because it cost about half as much the authentic Fender stamped saddles alone. The saddles and bridge themselves are of good quality. But in the end, I couldn’t use them anyways for two reasons. Number one: it’s a string through design. I wanted to use these on a Tele that has the same saddles, but on my Tele the height adjustment screws on the saddles are considerably taller to be able to reach the bottom of the bridge plate, because my tele strings underneath the intonation screws on the bridge instead of string-thru. Number 2: The height adjustment screws on both the high E and low E saddles are about half as tall as the other 4 in between. I don’t know if this design was purposeful or inadvertent to my specific product, but I’ve never seen it before, although I may be in the dark on that one. I would’ve used my original height adjustment screws in the new saddles, but unfortunately they’re different sizes. I’ll keep it around and use it eventually I’m sure, but I’m a little disappointed. The bridge also came in an unlabeled bag instead of the Fender Packaging. It looked like possibly the cardboard Fender tag ontop has already been removed. Overall I’ll give it 3 stars because it’s good quality and not completely useless, but not quite what I had hoped for. Although, if you’re looking for a string-through hardtail Strat bridge, for the price and quality of this I think you’d be highly satisfied!
Shed In A Box
Reviewed in the United Kingdom on May 5, 2016
Just needed one saddle but this was a snip to buy, so hey, I have 5 spares now ha ha.Typical Fender quality which translates to brilliant! Love Fender, (love Gibson too by the way).
Customer
Reviewed in Germany on April 28, 2016
Keinen Schrauben! Now I gotta find some screws by myself. A a a a a a a a a a
kc9ejn
Reviewed in the United States on March 17, 2015
I bought this bridge just to scavenge the saddles, springs and screws to put on my '86 Squier Strat's tremolo. This is a very well built bridge. I almost hated taking it apart!
Jim Kelly
Reviewed in the United States on September 9, 2014
Man, I love Fender parts. Minimally more expensive than bargain bin parts, but everything fits properly, works like it should and has a nice, slick coat of chrome (or nickel). Either way, the 6 saddle hardtail is unparalleled, particularly for the price. Package doesn't include mounting screws, as it does from some retailers, but they're easily sourced elsewhere.