Installed it, gas container was empty, grabbed it by the nozzle to move to truck, and it snapped immediately. Pissed me off. Had to leave that night.

Things fit properly and were of good quality. The hose bender, however, caused the plastic host to kink and restrict gas flow. Straight hose works fine though.

The product itself looks to be good and work well although the cover does not work on the LC2 fuel can. The threads don’t match up.

Will not fit LC 2 jugs cap is to small and wrong pitch.

Perfect replacement, fit 5.5 gallon off brand and my 3.5 gallon VP cans.Hose is a lot more flexible than original makes it easier to use with less kinks. Definitely recommend this seller, exactly what was advertised and fast delivery.

the hose threads are too small and they leak even with Teflon tape. Had to buy and 3/4 fitting and retro fit to make this work.

My review is based on a couple months of use off and on. I try not to review anything unless it has been a min of one month and/or 5 uses depending on how its used, lets face it most things look good right out of the box you want to know how its holding up after the return window closed.Box/Bag opening and initial thoughts-comes in a simple white bubble envelope of about the right length and size, took a tug to get everything out. Fuel hose on the fillers is a bit stiff, feels more like vinyl hose then fuel hose, but hard to tell. Getting the bend fitting on them took some effort, and I had to adjust to keep from kinking the hose. First time I had cutoff valves on ones, they turn well and the flow threw looks good no major obstructions. Cap has a flat seal at the top, I am used to a o-ring. Valve handles have a bit of flex to them, will probably be careful with them. Kit looks decent enough, will test with water first and see how that goes.Install/Use -  Installed the cap on a few different cans to see it it fit and sealed tight, cap does but the plug in the middle does not-leaks bad. Screwed on a valve hose setup to provided cap and it leaked just a little like a drop every few seconds. I am sure with some teflone tape I could clean that up, but none of my other cans require that. Other valve hose setup screwed onto one of my older caps perfect (white can)-it did not leak, but did not like a brand new cap I had (red can). Stuff really seems hit or miss, one hose had okay flow while the other defiantly did not flow as fast, I saw no real obstruction in that one plastic maybe just a bit thicker in the valve. Valves open and closed fairly easily-but flex, and they stopped the flow when needed. One thing I did notice with these your really not gonna know were the valve will line up, on one can it was perfect with the handle and easy to get too while pouring the other not even close. After testing I decided to dedicate these to my water jugs, just did not have enough faith in them for fuel, also the flow rate on both was not impressive.Final thoughts-I am sure you noticed I got this from Vine, because I write these awesome long reviews and take pics, as I too read reviews and use them to help me make decisions-hopefully you found my review helpful-now would I pay my hard earned side hustle, social monetization or 9 to 5er money for it-I would not, I would have returned them after testing them. Valves add an extra failure point, and difficulty, will stick with regular hose. For fuel I think its just easier to use a regular hose and that seems to flow faster in my testing. I consider value and what your spending in all my reviews and I have to give it 3 stars for Average for price paid. Its inline with what others on Amazon cost, but your almost at the point of just buying another bargain can, and none of these kits seem to have great reviews on Amazon. My recommendation test them thoroughly before the return window closes.I will update if I encounter any problems, keep on keeping on.

I have tried everything to keep these from leaking and finally the fill hose snapped off tonight.