Your cart is empty.
Your cart is empty.Product Description
1. This steel plate is made of high quality stainless steel. Flexible and durable. It's suitable for most filaments, such as PLA/TPU/PETG/ABS etc.
2. On smooth side, everything just slides off when so long as the bed is cooled down. On textured side, Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
Reference temp of nozzle and hot bed
Our engineers have tested to print above different filaments on this JanusBPS build plate. All tests are OK!
TheCross
Reviewed in the United States on February 19, 2025
Got this for my Prusa i3MK3 and seems to work nice. Had it for a few months now and some perm scuffing on the PEI from prints so not sure how long it will last but the cost is lower than OEM. A big note this is NOT a drop in replacement and luckily I adjusted my print nozzle a bit above the plate before a test as I found by doing that, that the plate is a bit thicker. With it being a thicker plate it could get damaged if you don't adjust the Z height and recalibrate.
Roger VanHoutan
Reviewed in the United States on February 29, 2024
My first print with Petg did hold very well and released well after cooling down. At the corners of the part, the pei film separated from the flex plate with small bubbles.This is not a product to last. My original Prusa Pei sheet lasted for thousands of print hours with no noticeable wear or bubbling.This sheet failed during the first 1-hour print.I have not tested the textured side.
Austin Y.
Reviewed in the United States on January 25, 2024
The media could not be loaded.
L Byrne
Reviewed in the United States on January 25, 2024
I purchased this sheet in its prior form from this company (2019) and it was wonderful. Recently I damaged it so I came back to get another. Now the pei is pre-applied before it came as a sticker I had to apply so it's much better this way because it was hard to lay down straight with no bubbles but unfortunately the steel itself is super flimsy which I don't like because my prusa hot bed has dips and I need a firm steel sheet to keep my prints level. This one just sags into the craters. I would like to see this beefed up a bit. For now I'm keeping it and just glued it to my previous sheet to give it sturdiness.
Mac TheTrite
Reviewed in the United States on December 9, 2023
I've only used it a couple times so far, but right out of the box, my first couple prints stuck to it perfectly, and then released perfectly when the print was done. I didn't have to pick at any stuck bits or scrape anything off or use a spatula or anything. I just flexed the plate and my parts popped off whole. The print border pulled right up with ease, too, all I had to do was push with my fingernail and it popped right off. There wasn't a hint of warping or loss of adhesion anywhere on the print, either. This is a really good print bed plate. I'll be buying more of these.
ETX
Reviewed in the United States on October 22, 2023
The media could not be loaded.
Ryan B Cadenhead
Reviewed in the United States on July 27, 2022
This has been the single best Upgrade I've made sor for to my Neptune 2. No more clips for the nozzle to knock off, great adhesion, prints just let go when they cool down after printing.
Brandon
Reviewed in the United States on February 22, 2022
I bought this sheet wanting to get away from glass and right out of the packaging my prints had no issue sticking to this plate. I did print PETG and after removing the part a chunk of the PEI coating came off. I reached out to FYSETC about this issue and I got in touch with Emily. She helped me right away and let me know that they would replace my sheet with a new one. Unfortunately it was not in stock but Emily did not give up. She came up with other solutions and they were able to get me a replacement within a few days. It's one thing to have a good product but to have awesome customer service is another thing. Because of how Emily helped me I will continue to recommend and get their products.
Recommended Products