Shopping Cart

Your cart is empty.

Your cart is empty.

Gas Powered Post Hole Digger Earth Auger - 52cc 2-Stroke Engine with 4'/6'/8'/12' Drill Bits & 8'/12'/20' Extension Rods for Farmland, Garden, Planting

Free shipping on orders over $29.99

$259.00

$ 99 .00 $99.00

In Stock

1.Model:Cylinder Capacity: 52cc


  • ▲MULTI-PURPOSE: Can dig holes for fence posts, install mailboxes, build decks, plant trees, and more.
  • ▲EFFICIENT: The post hole digger is capable of both simple post hole digging and deep trench digging. The two-stroke gasoline engine spins up to 7,000 rpm for precise, easy hole digging. The advanced vertical gearbox design also increases engine efficiency and reliability.
  • ▲EASY TO OPERATE: Provides smooth starting and consistent digging force, plus high-quality rubberized handles for relatively stress-free operation, and the advanced vertical transmission design also increases engine efficiency and reliability.
  • ▲EASY STARTING: Equipped with a manual recoil start easy fuel delivery system for quick pull start action and a large capacity fuel tank for long hours of operation.
  • ▲PROFESSIONAL TOOLS: Maximum depth of 2.6 feet using a single auger bit, including different sizes of auger bits (4“6”8“12”) and extension rods (8“12”20 “) and standard shaft size of 3/4” for different trenching requirements, which can help you complete all digging jobs quickly and effortlessly.



Product Description

  • As the item is relatively large, we will ship it with more than one package. Please don't worry when you receive the first package and find that something is missing.

  • Sometimes the pacakges are not delivered at the same time, if you want to know about the ETA of the other packages, please tell us.

510035
GGM-510035

Drill Bit Size

4":(diameter*length)4*32in/10.16*81.28cm

6": (Diameter*Length) 6*32in/15.24*81.28cm

8": (Diameter*Length) 8*32in/20.32*81.28cm

12": (Diameter*Length) 12*32in/30.48*81.28cm

Connecting rod size: length 8“/12”/20” (20.32/30.48/50.8cm)

Product Specification

Engine

Single Cylinder, 2-stroke, air-cooled

Engine

Single Cylinder, 2-stroke, air-cooled

Engine

Single Cylinder, 4-stroke, air-cooled

Cylinder Capacity

52cc

Cylinder Capacity

63cc

Cylinder Capacity

72cc

Power

1.51kw/7000rpm

Power

2.2kw/7000rpm

Power

2.4kw/7000rpm

Drill speed

170-220r/min

Drill speed

170-220r/min

Drill speed

170-220r/min

Size

50x21x34cm/ 19.69x8.27x13.39in

Size

46x40x30cm/ 18x15.5x11.8in

Size

50x40x25cm/ 19.7x15.4x9.8in

Note:

1 Please close the damper before starting the cold machine, and open the damper during normal operation.
2 Before leaving the factory, we added butter to the gearbox. After working for a period of time, please add butter appropriately according to your use frequency.
3 When you are starting, please start quickly. Don't stop when pulling the rope, pull it slowly.
4 Before starting, press the oil bubble several times and check whether there is oil in the oil pipe.
5 When the cold machine starts, please close the baffle first, and then open the baffle for normal operation.
6 Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
7 Please allow slight color difference caused by shooting light and 1-3 cm error caused by manual measurement, and make sure you don't mind before ordering.

Lazaro Alain Perez Garcia
Reviewed in the United States on May 12, 2025
Q me faltaron piezas
Recommended Products

$7,234.55

$ 99 .00 $99.00

4.9
Select Option

$149.39

$ 70 .99 $70.99

4.6
Select Option