Your cart is empty.
Your cart is empty.Product Description
Brass Rain Barrel Spigot with Ball Valve
Water barrel spigot faucet kit is one of the best outdoor faucets for rain barrels that will serve you longer time and more convenient.
This valve water barrel spigot can be installed on many water collecting equipment.Such as rain barrel,pet pool,water tank,tubs,industrial water container,aquariums and so on.
The product can be used in different medium flow, such as air, water, steam, mud, oil and various corrosion medium.
Used in daily life, commerce, and industry.
- 3/4" GHT Male Thread Outlet
MATERIAL
Brass quarter turn water spigot with aluminum alloy handle.
Leak Proof, Rust Proof, Freeze Proof, Guaranteed to Last.
WIDELY USE
Good for various pipes, faucets, hoses, fittings, multiple water tank to make things easier.
INSTALLATION CONSIDERATIONS
Drill a hole before installing. Pass the fitting through the bulkhead, pad the washers, tighten the nut. Connect the water pipe to the end.
- YOU NEED TO HAVE THE ACCESS TO THE INSIDE OF CONTAINER TO INSTALL THE NUT
Ideal for rain barrel,easily adjust the water flow,convenient and and practical.
Apply to aquariums,water tanks,tubs,pools and other containers that require water storage.
Connect to garden hose to water the flowers and flush the yard,no need to haul buckets or watering cans.
Frankie jennings
Reviewed in the United States on July 29, 2024
Worked perfect
Virg
Reviewed in the United States on January 22, 2024
Installed but not yet used to see how it works.
Customer
Reviewed in the United States on April 12, 2023
Well made, packaged right. Just what I needed for my dogs kiddie pool to drain onto my trees.
R
Reviewed in the United States on November 7, 2022
This bulkhead valve seems to be pretty well made. The machining on all the threads is good. There is a 1/2” NPT thread on the inlet. My photo shows a 1/2" NPT nipple (not included) threaded into the valve. The male threaded part that goes through the hole in your rain barrel or whatever you are mounting this on measures a full 1” diameter. Might fit in a 1" hole if the hole if the hole is on the + size. The gaskets and nut measure 1-1/2” outside diameter but the hexagonal part of the valve on the outside has no flange and is approximately 1-5/16” over the flats (just slightly wider than 1-1/4”).
shooter1322
Reviewed in the United States on November 30, 2022
just what i needed
C-DOG FAB & WELDING
Reviewed in the United States on October 29, 2022
I GOT THIS FOR A 30 GALLON RAIN BARREL SO I CAN HOOK A HOSE TO BARREL FOR WATERING MY FLOWER BEDS IT WAS EASY TO INSTALL AND EASY TO USE I JUST DRILLED OUT THE 1IN HOLE REQUIRED FOR THE HOSEBIB AND THEN INSERTED IT IN HOLE WITH ONE WASHER ON EACHSIDE OF BARREL AND TIGHTENED THE NUT DOWN TO SEAL THE FOR WATER TIGHT CONNECTION THEN FILLED THE BARREL BACK UP WITH THE RAIN WATER I HAVE COLLECTED OVER THESE LAST FEW WEEKS AND TESTED THE SEAL OUT IT HASNT LEAKED YET I AM VERY PLEASED WITH THIS PRODUCT AND I HIGHLY RECOMMEND IT
codemancer
Reviewed in the United States on October 28, 2022
I am not a plumber and don't do much plumbing work, so this review is from the perspective of a layman.I ordered this spigot because it seemed like it might be short enough to mount to the front of my truck's bed drawer system for water. Unfortunately it is a little too long, so it won't fit the bill, but I'll make my pain your gain by reviewing it anyway.First, I've looked at a number of spigots for this project, mostly from big box stores like Home Depot. They are all fine, but all flawed in some ways. This is actually one of the best ones I've seen. The brass seems like high quality; it is very hefty. The quarter-turn valve is smooth and easy to actuate with one hand (I've tried some that are very hard to turn). The threading is super smooth; like weirdly so... a small flick of the nut and it just glides up the threads no problem.I really wish this would have worked out for my needs because it is otherwise perfect. In fact, I'm considering modifying my drawers such that I can go ahead and use it anyway. If I am able to do that I will update my review with additional comments.
Pat Traynor
Reviewed in the United States on October 21, 2022
At my summer campsite, I have to run a hose through a wall, and I need to be able to disconnect it at the end of the season. Up to now, my only solution was to drill a hole in the wall big enough for the fittings at the end of the hose.When I saw this, a lightbulb appeared over my head. (Bystanders were amazed!) This is not the intended purpose for this rain barrel spigot, but I was able to install it on my wall and have garden hose connected at each end. I needed a small adapter on one side of the spigot, but it still does the job perfectly.
Recommended Products