Shopping Cart

Your cart is empty.

Your cart is empty.

iBrightstar 9-30V Extremely Bright 1156 1141 1003 BA15S LED Bulbs Replacement for Rv Tail Brake Lights, Brilliant Red

5.0 (13) Write Review
Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

1.:1157


2.Color:Xenon White


About this item

  • (Set of 2 Bulbs) 66SMD 3014 high power & high brightness chips per bulb, Working Voltage: 9v-30v
  • Fits: 1156 1003 BA15S P21W 1156A 1156NA 87 93 97 97A 97NA 199 631 1073 1095 1141 1195 1295 2396 3497 5007 5008 7506 12088 1295NA etc. Easy installation, plug and play.
  • Application: Brake Lights, Tail Lights, Daytime Running Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash or system error.
  • Advantage: Non-polarity design, 400% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature, built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.


Non-polarity design, the brightest in the market.

Features
High Brightness LED: 66SMD 3014 chipset.
Working Voltage: 9-30V (fit 12V, 24V vehicles).
Output Wattage: 2W/Bulb (Low Power Consumption).
Color: Brilliant Red.
Waterproof: IP65.
Service Life: Up to 30,000 Hours.

Note:Since LED lights take less power than traditional bulbs, load resistor or a LED flash relay might be needed to prevent the hyper flash or system error.

IMPORTANT NOTICE! Please confirm the bulb size before placing an order.
iBrightstar is a registered brand with Amazon. Please contact us if there is any questions or other requests!


John Styers
Reviewed in the United States on February 3, 2025
LEDs are bright as advertised. I failed to account for the change in resistance and my blinkers operated at a high frequency. New relay fixed the issue.
Horrible no bigger than a toaster.
Reviewed in the United States on January 5, 2025
Fits perfectly on 92 Jeep YJ Wrangler
S. Milan
Reviewed in the United States on August 17, 2024
These pictures show very little difference in the brightness of these bulbs vs Antline 1157. $7 each vs $4 each. Not worth the extra cost.
Diamond Satellite Systems
Reviewed in the United States on May 9, 2024
These new LED backup lights are absolutely phenomenal! They shine with an incredible brilliance, easily 7 to 8 times brighter than my previous lights. I installed them with safety in mind, checking my surroundings before backing up. As fate would have it, my cell phone rang—it was an annoying spam call. Suddenly, I heard a shout and realized just in time that an elderly couple was walking behind me, oblivious to my vehicle. Thanks to the unparalleled brightness of these lights, disaster will NOW be averted! What an incredible, affordable investment in safety and peace of mind!
ShredMaster
Reviewed in the United States on February 2, 2024
You've all seen them. The new cars and trucks with the almost blinding brake lights that are impossible to miss. I was looking for some of the nuclear goodness for my almost 40 year old motorcycle. The old filament style 1157 bulbs are not super bright no matter what you do and it was time to up my game. Anything I can do to make myself more noticeable to the cagers is a good thing. After doing some research I landed on these bulbs. I've had them in for a season and I can tell you they are MUCH brighter than the old bulbs. Anyone that says they couldn't see me braking is either lying or blind and should not be driving. If you are new to replacing your old style bulbs with LEDs be aware that most older motorcycles have issues with replacing all the old style bulbs with LEDs. This is because the flasher unit is expecting a certain amount of load (power used by the bulb). Since LEDs are so much more efficient they do not draw as much power and can wreck havoc with the flasher unit. Either it will not flash at all or will flash super fast (hyperflashing). This can be rectified in a couple of ways. You could buy a LED compatible flasher, add a resistor into the circuit, or just do what I did and leave a few of the old style bulbs in the bike. These will provide the needed load and prevent the hyperflashing. Once you decide to replace them all with LEDs, you'll need to address the issue.
-----
Reviewed in the United States on December 24, 2024
These are high quality but the website does not state you will need a LED Relay (not the OEM standard relay for incandescent bulbs on older vehicles) otherwise blinkers will blink too fast and not always work.
gato felix
Reviewed in the United States on October 28, 2024
GREAT REVERSE LIGHTS
Charles-Yvon Boisvert
Reviewed in Canada on September 28, 2023
When i hit the brake this light flash until i stopped and are ok for tail light.I bought this expensive one because i try another led bulb with not noticeable différence between running light and brake light.I return to old style for Honda Ruckus 50 cc not the seem brightness but big difference between tail or brake and work perfectly.I return this one.
Stephanie Hordyk
Reviewed in Canada on June 17, 2023
Tail light is fineBrake light flashing constantly will not go solid at all...
Joaquin
Reviewed in Mexico on September 2, 2022
El pedido llegó a tiempo, las acabo de instalar, muy facil intslación. Este modelo de lámparas 1157, tiene 2 puntos de conexión en la parte baja del socket, esto es para que funcione en baja cuando estás en modo estacionamiento o cuartos y en alta cuando accionas los frenos. Sin embargo, estas lámparas se mantienen todo el tiempo en alta, como si todo el tiempo estuvieras accionando el freno. Revisaré con el fabricante a qué se debe, tengan este fallo en consideración.
Benjamin Gómez
Reviewed in Mexico on October 18, 2022
El producto se aprecia de calidad regular en los materiales. Probada 1157R en Toyota avanza, cuarto/freno, solo cambiar uno por otro.La luminosidad es mayor que los originales de halógeno, apenas mejor en un 50% aproximadamente. Por otro lado sería conveniente que la diferencia de luminosidad entre el cuarto y el stop fuera más notoria para más seguridad. Esperemos ver la durabilidad, si llega a fallar actualizaré para dejar referencia del tiempo.
Frank Watson
Reviewed in Australia on February 18, 2021
Really very good
R. Sharples
Reviewed in the United States on October 29, 2020
I have installed the red version of these 1157 LED bulbs in the tail lights of a 1960's antique car where they are used for parking lights and brake lights. One concern many people have with these dual function bulbs is that the brake lights will not be significantly brighter than the parking lights. This bulb does not have that problem. The parking light illumination is much brighter than the incandescent bulb it replaced and the brake light is obviously brighter than the parking light. People will have no trouble noticing that you have applied the brakes when your parking lights are on. Also I had no issues with the bulbs flickering. My antique car uses a generator rather than an alternator so the voltage fluctuates between 12 and 16 volts depending on how fast the engine is turning but these bulbs maintain the same level of brightness across that voltage range. I'm very pleased and will consider using these in some of my other older cars.