Shopping Cart

Your cart is empty.

Your cart is empty.

ICON 12511 Fitting, Hub, 3'

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • Transitions from polyethylene holding tanks to ABS plumbing
  • 3" female slip end with O-ring included
  • Butyl sealant (part # 12062) and a hose pipe clamp can be used to seal the hub to a molded polyethylene collar
  • Color: Black


This hub is for transitioning from polyethylene holding tanks to ABS plumbing. 3" female slip end with O-ring included. A butyl sealant (part # 12062) and a hose pipe clamp can be used to seal the hub to a molded polyethylene collar.


Keona1
Reviewed in the United States on January 4, 2025
Was not delivered to my house but the neighbor's house good thing I went over and looked and found it
mark
Reviewed in the United States on September 21, 2024
Comes with the O-ring. RV's are poorly put together, zero thought given to maintenance. I needed to replace 2 waste valves. The tanks faced each other with no room to take out the valves, let alone replace. It was necessary to completely start over. So i cut the pipes, took the existing fittings out, and replaced with 2 of these. Connected new pipework, with a 3" fernco so I can easily replace valve seals.Glad I did the research and found these.
camil tremblay
Reviewed in Canada on July 9, 2024
Il y a trop de lousse entre le joint et la partie femelle , je crois que le oring est trop étiré . En étirant il devient plus mince . À mon avis il manque environ 1 @ 1.5 millimètres pour bien étancher sur le diamètre . Je vais essayé de trouver un joint torique de la bonne dimension. À mon avis il faut un oring de 90mm de diamètre extérieur ( donc un joint de 4mm et 82mm diamètre intérieur, à tester).
Terry Desper
Reviewed in the United States on May 18, 2024
I had to replace my entire great water drain line from the tank to the drain valve on our 2021 Grey Wolf 22rr toy hauler. Most of the abs parts and 1.5" pipes/fittings were easy enough to find. This piece was not. It fits into the tank and has an o'ring and caulk secured by a large radiator hose type of clamp. A reducer is glued into this piece to fit the 1.5" abs line. After extensive searching I took a chance on this piece. After all, it's only like $10. Perfect, exact fit. Hope this can help someone else. Ymmv
J-Rod
Reviewed in the United States on January 11, 2024
Exact replacement, came with o-ring too. Just glue the 3” pipe to it, lube o-ring and reinstall.
Kent Bailey
Reviewed in the United States on August 16, 2023
Made my day when this showed up and with a oring and slid right in. I put a tad of silicone on the oring just in case... this way if i everHave to redo the plumbing won't be such a bear to get out and clean the tank side.
Customer
Reviewed in the United States on June 23, 2021
Was expecting the rubber o rings to be included.....not! The description does not say anything one way or the other about wheather an o ring is included. The photo does not show the oring....No place to order one either...
Recommended Products

$24.00

$ 10 .99 $10.99

5.0
Select Option

$14.99

$ 6 .99 $6.99

4.5
Select Option