Your cart is empty.
Your cart is empty.Product Description
Monika Seitz
Reviewed in Canada on March 14, 2025
exactly as described
Mark M
Reviewed in the United States on March 12, 2025
These were helpful when I had to splice a low-voltage pool temp sensor wire that got damaged by the landscapers. Saved me from having to replace a $300 sensor. I've had for about 10 months, and so far, so good.
RJMHRT
Reviewed in the United States on January 31, 2025
Had a break in underground 110v wiring with very little slack to work with. This product went in quickly and very secure for the long term.
Customer
Reviewed in the United States on April 2, 2025
The four top screw holes meant for the box are not threaded deep enough, so the top cover doesn’t seal all the way.
ChrisR
Reviewed in the United States on April 12, 2025
Not large enough for outdoor lighting or 110v wiring and did not appear to be waterproof. Returned item.
D. Kodgis
Reviewed in the United States on September 26, 2024
Easy to use; they work well I spliced four wires underground and it has been six months in wet conditions with no issues. These are sturdy. They have seals. I think these will do for the long haul (several years) underground and keeping the splices water-free). My application was with 10 gauge wire. It fit. Highly recommended.
George Russell
Reviewed in the United States on September 14, 2024
Sturdy, water proof, cost effective, tired of greased wire nuts on landscaping wires? Use this junction box instead.
jose u.
Reviewed in Mexico on November 23, 2022
Facil de usar y muy practico
JoeZ
Reviewed in the United States on November 21, 2020
These boxes are well made and detailed. They work very well for their intended purpose. However for my application I had to drill holes in the box and cover to install a waterproof fuse holder and a waterproof switch. The wiring got quite tight inside the box but I couldn't use a box that was physically larger.One hint to make your life easier. The four screw holes for the cover are a bit too small for the screws. The screws are tiny and you'll strip the phillips head trying to force them in. Enlarge the holes with a #42 drill bit and the screws go right in and still hold tight.
Black Cat 9 Lives
Reviewed in the United States on May 30, 2019
These are nice boxes and work well.Only issue . . . I suspect the head of the screws provided may not be Phillips but something like Pozidrive or Frearson. (Cross heads used in Europe and maybe Asia)The plastic holes are tight, and no size of Phillips I could find would nicely drive the screws without mashing the cross head.For the 2nd box, I will slightly drill out the screw holes before attempting to screw them in (or find an appropriate driver. I must have one somewhere.)That said, these are nice little boxes, and the cable seal seems to work well. Yes I would recommend.
RKC Technologies Inc
Reviewed in Canada on January 13, 2017
Nice little junction boxes ideal for little projects around the house or workshop
Customer
Reviewed in Canada on November 16, 2016
Works as expected. Nice size for tying in security cameras on exterior of house.
Recommended Products