Your cart is empty.
Your cart is empty.Product Description
Mary G
Reviewed in the United States on March 30, 2025
We had some issues setting this up, not realizing that the pegs had to snap in hard at first. There were no instructions. The spacing is kind of tight, I don't know if larger items would fit easily. Once set up, the pegs seem to hold firm. Drainage could be improved, but overall this is a nice set-up, solid and sturdy.
Dixie
Reviewed in the United States on February 1, 2025
This lab drying rack is well-built and stable, making it a reliable option for drying glassware. The double-sided design is great for shared spaces, and the removable pegs allow for some flexibility in arranging different sizes of equipment. Once assembled, it holds a good amount of lab glass securely.However, the peg spacing is too tight, making it tricky to fit larger flasks without taking up extra room. The lack of included instructions is also a downside—you have to watch an online video, which isn’t always convenient. Additionally, the drainage system could be better, as water sometimes pools at the base instead of draining efficiently. On the plus side, the rack itself is lightweight yet sturdy, making it easy to reposition when needed.Overall, it’s a practical and durable drying solution, but a few design tweaks would make it even better.
letmepicyou
Reviewed in the United States on January 25, 2025
Like most amateur chemists, I have quite a bit of glassware. Prior to getting this, I have done things like...turn my Erlenmeyer flasks upside down in the bowl of my KitchenAid stand mixer to dry out. Of course, this isn't ideal.So when I got this today, I was pretty excited to get it set up and installed on the wall. Luckily, it fit in the spot I had pre-planned for it, so I got busy putting it up.I do want to point out that it doesn't come with instructions, you have to watch their video if there's something you don't get. It's not totally self-explanatory, either, so the video can be a must. They really should have included an instruction sheet, however. Installing the pegs can take a bit of pressure and pushing on it just right, but aren't too hard to get in.Installing it on the side of a cabinet in my kitchen took about 20 minutes. I ended up having to find some more appropriate screws to mount this with, which really isn't the fault of the rack but more about my own choice of where to install it. But I mounted it to the side of my kitchen cabinet, so I didn't need anchors, and the included screws would have been too long. I found some shorter screws with wide heads and they were perfect.Once mounted, it's very secure and I don't get any sense of instability. It holds quite a bit of glassware, but honestly, a lot of my stuff has to be spread out a lot because the spacing is a little close. This could really be a few inches wider AND taller for the number of pegs it has. As you can see from the photo I took of it installed, my 1000ml Erlenmeyer flasks take up a LOT of space. But I have 4 Erlenmeyer flasks, 3 separatory funnels, and a few other bits on here and it holds it all pretty well, and I still have room for quite a bit more.It didn't seem to jive well with any of my condenser tubes though. Beakers are good but bigger ones once again have to be spread out. I find that putting small pieces next to large ones helps balance it out and maximize the available space.In all, I really like it and it's going to get a LOT of use. I just wish it were a bit bigger so the pegs could have more space between them, and it would be nice if it came with an instruction sheet rather than having to go online to watch a video. I gave it 4 stars, and recommend it if you need a place to dry / store some lab glassware.
RocknRunner
Reviewed in the United States on April 26, 2025
This is such a great addition to my lab. I didn't have a place to dry my glassware after washing it. I thought about just a plain old dish rack, but my friend and one of these installed in his lab. Not wanting to be left behind, I got this. It's worth it's weight in gold. No more toppling of graduated cylinders and test tubes! And it holds so many! I highly recommend this product to anyone looking to dry long, skinny glass ware!
Henry Charry Penagos
Reviewed in the United States on April 11, 2025
El producto muy bueno y cumple con los ofrecido. En nuestro caso faltaron los conectores de la manguera a los desagües, tuvimos que calentar la manguera para adaptarla al tubo y luego ponerle una abrazadera para que no se soltara.
Recommended Products