Shopping Cart

Your cart is empty.

Your cart is empty.

LS Stage 2 Truck Cam Camshaft Kit 212/218 .553'/.553', Beehive Springs, 7.400' LS Chromoly Pushrods, Seals and Gasket Set for 1999-2013 GM Gen 3/4 4.8 5.3 6.0 6.2L

5.0 Write Review
Free shipping on orders over $29.99

$270.99

$ 99 .00 $99.00

In Stock
  • Stage 2 cam kit include: 1 x stage II camshaft, 16 x .560" ls6 valve springs, 16 x ls hat seals, 16 x 7.400" ls chromoly pushrods, 1 x timing cover gasket set, 1 x balancer bolt
  • Cam Specs: 212/218 .553"/.553" 111LSA, 3-bolt pattern
  • Replacement for: Stage 2 Truck Cam V2, fits 1999-2013 GM Gen3/4 LS 4.8L, 5.3L, 6.0L, 6.2L Chevy Silverado GMC Sierra
  • Feature: This Vortec Truck cam use a 3 bolt cam gear and were designed with low lift, so GM LS2, LS3 and LS6 springs and pushrods can be used
  • Buy with Confidence: If there is any problem with the product you purchased, please contact us via email


Product Description

ls stage 2 cam kit

Camshaft Kit Include:

  • 1 x Stage 2 Camshaft
  • 16 x LS Hat Valve Seals
  • 16 x LS6 Beehive Valve Springs
  • 16 x 7.400" long 5/16" Diameter Chromoly Pushrods
  • 1 x Timing Cover Gasket Set
  • 1 x Balancer Bolt
car

Fits 1999-13 GM LS Truck Applications

  • Fit for LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines
  • For 1999-2002 Camaro and Firebird
  • For 2010-2013 Camaro
  • For 1999-2013 Corvette
  • For 2004-2006 Pontiac GTO
  • For 2004-2007 Cadillac CTS-V
  • For 2008-2009 Pontiac G8
  • For 2000-2013 Tahoe, Yukon, Escalade
  • For 2003-2009 Hummer H2
  • For 1999-2013 Silverado and Sierra (4.8L, 5.3L, 6.0L)
stage 2 camshaft

Cam Specs:

  • Engine Type: Gen III/Gen IV LS
  • Lobe Separation (degrees): 111
  • Camshaft Gear Attachment: 3-bolt
  • Camshaft Style: Hydraulic Roller
  • Intake Duration at 050 inch Lift: 212
  • Exhaust Duration at 050 inch Lift: 218
  • Duration at 050 inch Lift: 212 int./218 exh.
  • Intake Valve Lift with Factory Rocker Arm Ratio: 0.553 in.
  • Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.553 in.
  • Valve Lift with Factory Rocker Arm Ratio: 0.553 int./0.553 exh.
springs and pushrods

.560 LS6 Valve Springs:

  • 100 lbs @ 1.800"
  • 285 lbs @ 1.240"
  • coil bind @ 1.150"

7.400" Chromoly One Piece Pushrods:

  • Overall Length: 7.400"
  • Overall Diameter: 5/16"
  • Wall Thickness: .080"
when do you need to replace your camshaft