Your cart is empty.
Your cart is empty.NCFam5
Reviewed in the United States on May 13, 2025
I have the Eureka canister vacuum (which is great btw) that I have broken two wands during the four years of ownership. Not anymore with these metal wand replacements. I can't imagine these will ever break unless you run them over with a car or something. They're durable, lightweight and fit perfectly. I'll never go back to the brittle plastic wands for this vacuum.
Perry Brown
Reviewed in the United States on April 7, 2025
Exactly what I needed.The wands fit together nice and snug.Not too heavyFit my floor attachment perfectlyVery pleased with this vacuum replacement wand.
Thomas
Reviewed in the United States on April 22, 2025
Have an off brand vacuum and needed to extend the attachments. These are just a bit shorter than most but plenty long enough. The size will fit most any of the smaller vacuums. Works as I need it to extend reach and add attachments on the end.
Joska
Reviewed in the United States on April 20, 2025
Perfect fit on the Mighty Mike!
Service Engineer
Reviewed in the United States on April 10, 2025
PRODUCT:“Metal Extension Wand Hose Replacement for Eureka 3670M Canister Vacuum Models 3670M 3670 3680 3670G 3670H 3672 3673 3674 3682 Series (15.8inch, Pack of 2) by JEDELEOS”---------------------------------------LIKE:- Aluminum Alloy, not stainless steel (but to me, looks and feels like it)- These won’t MELT or burn like plastic.- These are STRONGER than plastic, and yet about the same weight- Where the tubes overlap, the inside “lip” is thin, so it doesn’t restrict the airflow or get clogged as easily as plastic tubes.- If I’m using the end of the tube to suck up rocks etc. scraping along cement crevices etc, these metal tubes won’t grind down nearly as fast as the plastic will.- I might be able to dent the metal tubes, but they shouldn’t CRACK like some of my plastic tubes have done.These fit the hose ends of my old Eureka Mighty Mite model #’s: 3123 and 3110 hose ends.AS WELL AS the majority of my other plastic extensions, and ALL of my 1.25” type end attachments.Only ONE other 1.25” size hose end and ONE (of 9) tube ends were slightly too wide to fit into these.BUT I could simply use a plastic extension tube to the hose or end, and then the small end of that tube DID fit into one of these metal ones. -- so still no problem.Check yours before you buy? Here’s dimensions:Tube Dimensions:Length each: a hair under 15.75” (39.9cm)Length of the two tubes nested together: ~30.25”Larger end:inside diameter: 1.25”,outside diameter: 1.29”Smaller End:inside diameter: 1.17”outside diameter: 1.19” to 1.23” at a seamWeight:1 tube was 4.00 Oz, the other one was 4.10oz.(so together, these two 30.25” long shiny metal tubes = 8.1oz.)=================For comparison, Other 1.25” Extension tubes I checked:A single 1.25 size plastic tube = 26” long = 5.40ozA plastic extension tube: 16” long = 4.2Oz. (only 1/4" longer and similar weight.)I have an old metal extension tube (chrome-plated and starting to rust with thicker walls)= 20” long and weighed 9.65oz (so it is heavier and shorter than these 2 new tubes at 30” long together)---------------------------------------
Customer
Reviewed in the United States on April 10, 2025
They feel like a quality item and fit into each other nicely, but these wands are much shorter than the stock ones that come with the Eureka Mighty Mite - each tube is a good 4 inches shorter. So when you use both, as many people will - you're losing 8 inches, which might be good for some people, but really sucks for someone 6'5", like me. The pictures I attached are next to the stock wands, and taken on 12 inch tile for reference.
Recommended Products