Your cart is empty.
Your cart is empty.Product Description
dodgeray
Reviewed in the United States on December 11, 2024
Made in USA and doesn’t leak like the cheap ones bought elsewhere.
Mike B.
Reviewed in the United States on November 21, 2024
Easy to connst
Robespierre
Reviewed in the United States on September 1, 2023
There are few things in this life as irritating as the hiss of a leaky pneumatic fitting accompanied by the frequent and jarring start-up of the associated compressor. Milton quick connect fittings don't leak and thus don't hiss. And they don't cause a heart attack every time the damn compressor starts up. They bring back the joy of pneumatic tools.
Christopher M.
Reviewed in the United States on July 5, 2022
Don’t cheap out on some Chinese crap! These are AMERICAN made and the best! These are the best of the best and once I replace broken ones of cheap hoses and tools with Milton I rarely have to change them again!
Jeff proud USA Legal Citizen
Reviewed in the United States on November 29, 2020
Have a common porter cable pancake compressor with included cheap polyurethane hose with quick disconnect permanently on end of hose. Replaced the unruly cheapo hose with a dewalt hose and the Milton S-212 quick disconnect. Well worth it.No leaks. Snaps on solid. No big air loss when changing tools at the disconnect as before with the stock porter cable. Very nice.Does require snapping the disconnect closed sometimes.
Victor M. Vivanco
Reviewed in Mexico on September 8, 2018
Producto de buena calidad, aquí hay poco margen para que salga mal el producto, llego a tiempo, en su empaque y cumple su función.
Dwaynes
Reviewed in Canada on January 12, 2018
Great product and just what I needed. Works Great. Does the Job.
Phil
Reviewed in Canada on June 29, 2017
The coupler is hard to engage. Also, you need to depress the coupler in order to engage a tool in it. I recently bought Bostich couplers and I prefer them, easier to operate. The Milton coupler seems to be well made however.
Timothy M. Abel
Reviewed in Canada on December 15, 2016
A++++++
Paladin
Reviewed in the United States on April 28, 2016
I used a Milton connector on my service hose for about 5 years. Five or Six days a week working on heavy earthmoving equipment every day. Mostly 'in the field', working in the dirt, mud and on a good day on concrete. I retired in 2007 and brought my tools to my home garage. Since 07 I only use the hose a couple days a week. Last week it started leaking when I removed a tool. Did not leak connected so I left my 1/2" impact connected till this one arrived. I will probably never wear this one out since the pervious one lasted well over 12 years with out leaking. The old one was so scratched up, from dragging on the ground and concrete, it was hard to read 'Milton' on it. When I saw these I knew it was the coupler I use for all those years. Couples and un-couples easily. Yes it is a bit stiffer than my old one but that is to be expected. I ordered this set of couplers because I can always use extra tool connectors and it was only a few dollars more than the coupler alone.
J
Reviewed in Canada on November 24, 2015
as described
Homer
Reviewed in the United States on November 16, 2015
These work fine. I needed some new couplers to add to my air tools. The brass ones are great but I felt the price and my need for several adapters for basic house work didn't warrant the expense.So, got these, used some Teflon tape, and a perfect seal.I've used these on multiple couplings and they work fine. No leaks and good machining.Only four stars because they're not as nice looking as brass and how can you love a coupler
AZ_Sobo
Reviewed in the United States on May 16, 2013
I have purchased couplers and plugs from different outlets over the years, all have been manufactured overseas, usually China and they all leak air. Some leak all the time and some leak only when the tiniest bit of stress is placed on the coupler. These couplers do not leak, they are a solid fit and are quality made products. At Amazon prices they cost no more than the leaky ones, if you are looking at them then you probably want/need new ones, just do it, you won't be sorry.Edit: 11/8/2014Still holding up without any air leaks. I do take better care of this coupler set than I have with others I've had over the years. I do not leave tools connected to the coupler when I'm not using them, that is something I never did before, I always left, usually the air blow gun connected at the end of the day, I'm sure didn't help the cheaper couplers.
Recommended Products