Your cart is empty.
Your cart is empty.Product Description
Dimension approximate:
Pumpkin: 1.53x1.9inch, make bottle 0.9x1.6inch
Hexagon: 1.6x2.28inch, make bottle 1x2inch
Beaker glass: 1.53x1.89inch, make bottle 0.86x1.45inch
Round base 1: 1.75x2.2inch, make bottle 1.18x1.7inch
Round base 2: 2.2x1.65inch, make bottle 1.9x1inch
Round base 3: 2.2x1.7inch, make bottle 1.9x1.1inch
Tea pot large: 1.8x1.36inch, make larger tea pot 1.45x1.18inch
Tea pot small 1.14x0.78inch, make smaller tea pot 1.14x0.78inch
Mold color: clear
Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)
Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit
Dishwasher/oven/refrigerator safe. Food grade, no BPA/PVC/phthalate. Wash and boil before use, especially for food.
ITEMS YOU MAY ALSO LIKE!
Theresa Mosher
Reviewed in the United States on May 5, 2025
The 6 piece version is very difficult to use. Even with binder clips and trying to seal the edges, it is going to leak and create seams that have to be sanded down. I tried all 3 of my UV lights attempting to find which one would reach the center of the mold to cure it but none of them were able to fully cure these before demolding. The 7 piece set is much easier to handle and are 99% cured and just need a quick set off the center with UV light after but they take a LOT of resin for uv and need to cure for at least 15 min under the lamps before you can think about touching them. The molds did work much better with a fast setting epoxy that cured in 4 hours and came out of the molds much cleaner though the 6 piece version still had a ton of leakage and seams to clean up. I’m just not sure these are worth the hassle. If you do want to make them, I recommend the 7 piece version with a fast cure epoxy.
Pamela Walker
Reviewed in Australia on January 30, 2025
Even with binder clips the molds still leak, plus I found with the UV lamp I was using they wouldn't cure. However, I do have a stronger dual sided lamp now, just have to work out how to stop them from leaking.
Sylke Scholz
Reviewed in Germany on July 22, 2024
Alles bestens
カスタマー
Reviewed in Japan on October 5, 2024
とても可愛らしい小瓶ができました。ただ色々なモールドでレジン製の小物を作ってきた中では制作難易度は高めかなという感じがしました。モールドの透過性があまりないためレジン液がどこまで入っているか光に透かしてみないと確認しにくく気泡が入ってしまっていると穴が空いたり瓶が割れたような形になってしまうかなと。それでもなかなか他ではお目にかかれない面白い型で出来上がったものは子供達にとても好評だったのでとても満足しています。
沙耶
Reviewed in Japan on August 4, 2023
デザインはとても好みなのですが、いざ作ってみたらレジンをどこまで入れたらいいかが見極められず真ん中の芯を押し込む時に溢れたり足りなかったり、固まってみたら気泡で欠けてしまい完成しなかったりと自分には難易度がとても高いモールドでした。それと、商品画像の2619番？(一番小さい型)は中が空洞ではなくすべてレジンで埋めるタイプだったので、瓶としては使えないのが残念でした。
ETrett
Reviewed in the United States on May 13, 2023
I received two pieces of the same side of one of caps (of course the cutest one). I didn’t think it was a huge deal assuming they would be able to send a replacement but after contacting the company via the help request I have not received a response. Amazon only offers the option to return the full set for a refund, and I had planned to be able to at least start using what I had received that was sent correctly. It’s extremely frustrating/ disappointing to have no response to the issue and have to return the full set for one piece being inaccurate, but it was one of the main reasons I liked the set.
SaybiBell
Reviewed in the United States on March 7, 2023
These are the cutest little bottles! Turned out far better than expected, and also much easier. My 1st bottle I made in under 5 minutes and I'm in love.This brand of molds has been amazing so far. I see many purchases in my future.
Nunzio
Reviewed in the United States on September 10, 2022
Update these bottles are very cute and u need clips to hold them together I suggest strongly to use UV curing resin as for it sets fast, watch for air pockets around the seems. They are for of an experienced resin crafterReally thought they would be cute but they r impossible to make wasted so much resin trying to make at least just 1 but not a single one came put after several trys so bummed
Alisha
Reviewed in the United States on March 14, 2022
I was unsure about ordering these after seeing some of the reviews but I'm so glad I decided to try them out anyways!! I am VERY new to to resin crafting, but these were super simple to use!! I used UV resin, haven't tried them out with epoxy resin yet but I will update this after I test that out 🙂
Ty w.
Reviewed in the United States on February 16, 2022
These things are so cute! It takes seconds to make with UV resin.i seal the top first before bottom to put chunky glitter and glycerin to make shakers.the insert held well and I didn't use clips to hold them together I used rubber bands instead. This was my first try and I haven't used the other molds. Overall These are great molds.
Alex
Reviewed in Canada on January 18, 2021
Surprisingly good and with a few additions (extra resin gem on the cap, the tip of a plastic paintbrush handle, and a bit of hot glue on the cap to make it snug), it makes an excellent perfume bottle. Pleasantly surprised by the quality.
ohblahdi
Reviewed in the United States on July 17, 2020
The video makes it look easy to make these small bottles but even as an experienced resin maker, it is very difficult to get these little bottles to come out completely whole. Getting the molds to stay together was accomplished with tape and a bunch of binder clips. This works okay but tape does not stick well to the silicone molds. The lids and bottoms come out fine but not the bottles.The main problem is that after you put the resin in the mold, and put the insert in the mold, the insert floats up which allows the resin level to drop down which in turn causes the bottom of the bottle (top of the mold) to not form correctly. Also, because of the design, even if you do get enough resin in the mold, the resin tends to get an air bubble in the same spot so I've only managed to make one good intact and properly formed bottle out of about 10 tries and that was with the center insert piece stuffed full of skinny stirring sticks to hold it down. I've now added a heavy bolt and lead fishing weights to hold down the insert and that works but trying to get the resin to fill up that one area that forms the bottom edge of the bottle is ridiculously difficult. I've even tried piping in extra resin around the side of the insert, using a bent toothpick to go around the edge that forms the bottom band, and filling the entire mold with resin first and then sucking some back out to prime the area and none of those methods helped at all. I've ended up just cutting off the bottom 1/2 " of all but 1 bottle so all of my bottles are now shorter than intended and none have the nice bottom edge they are supposed to have. The larger bottle mold has the exact same issue. Really frustrating and very wasteful of resin.
S.Coates
Reviewed in the United States on October 22, 2020
So throw all directions away. I believe there are some directions when you were swiping through the pictures of the bottles. This product is for UV only resin in my opinion. Otherwise you are going to have the biggest mess to clean up.#2.Make sure you get a quality UV resin and a flashlight. a UV flashlight to cure. That’s where I went wrong I was trying out a different type of resin. I often do. It wasn’t a mess but I’m not a beginner it wasn’t how I wanted my product to turn out like. It was not because the molds. The resin has everything to do with it and the flashlight the UV flashlight needs to be strong enough to penetrate the molds.3#. I would not say this is NOT for beginners but I think any beginners should definitely try it you’ll probably want to bang your head up against the wall the first two bottles..... Maybe not like I said the whole thing depends on your resin and how strong is your UV flashlight.A little common sense you’ll figure it out.........you’ll get it. The directions on Amazon that they put for your use worthless!!!!!! you kind a need to go with the flow figure it out you’ll be fine as far as the molds they’re really cool I think a lot of people have no idea that you can’t use regular resin with it because that is just not gonna happen or at least for me.I will be updating this after I get the my normal uv resin that I’m used to for jewelry making and craft stuff. I will show pictures of the two. The difference.
Recommended Products
$5.99
$ 2 .99 $2.99