Your cart is empty.
Your cart is empty.Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Oakwali
Reviewed in the United States on February 11, 2025
Perfect fit for a dodge ram lower control arm. Tip: if the old one is seized up, cut the bolt off on both ends so the shock is loose. Knock out the remaining bolt, and rubber. Go to harbor freight and buy a 15$ air hammer. Put it on the edge of the inner race and walk it around the race as you impact it in towards the center. At some point it breaks loose and pops out. Then use a socket or something over the new one and hammer it home.
Matt
Reviewed in Canada on January 7, 2025
Bought for my dad's truck. He's a retired mechanic. He's happy with it.
James
Reviewed in the United States on April 3, 2025
This Bushing Kit was really easy to use and is working as it should. One tip is to avoid a seized bushing, use anti seize on the bolt.
Thomas
Reviewed in Canada on March 6, 2024
Package only comes with 1 bushing so need to order 2. Product fit my 2010 ram 1500 with some persuasion from the blunt side of an axe. Toughest part is getting the old ones out.
Tmb
Reviewed in the United States on February 28, 2024
Fast delivery, perfect fit
Yurii
Reviewed in Canada on August 13, 2023
These bushings saved me $700, but I warn you, it's not an easy job.
sylvain
Reviewed in Canada on July 17, 2023
Compatible à 100 % avec mon ram 1500 2014
Dennis A Shea
Reviewed in the United States on August 20, 2022
Sent me one new part along with one old rusty part with cracked and aged bushing. Boxes were not that you would expect from new parts. The one with new parts had a bolt with a nick in the threads.
PIERRE MARTEL
Reviewed in Canada on March 20, 2022
Bardo’s
Reviewed in the United States on May 8, 2020
Great price and fit my 2010 ram 1500 perfect
Tanker
Reviewed in the United States on September 5, 2019
Works well, if your changing struts out or just getting rid of a squeak, these will work great.
Customer
Reviewed in the United States on July 30, 2019
Perfect for a 2011 Ram 1500 that had seized old bushings when changing the front struts.Make sure you have a bushing/ball joint press tool and the removal of the old and installation of the new is easy as pie. The hardware also uses a 24mm bolt and nut that are 10.9 grade , plenty good enough for the application.
wayne smith
Reviewed in the United States on February 27, 2019
The price was good, and the product was perfect fit.
Recommended Products
