Your cart is empty.
Your cart is empty. Motorcycle Gear Indicator For SU&ZUKI GSX-R750 GSX-R600 GSXR750 GSXR600 GSXR 750 GSX-R 750 600 Accessories Gear Display Meter
1-6 Level Gear display
For SU&ZUKI GSF600 Bandit 2000-2004
For SU&ZUKI GSF650 Bandit 2005-2006
For SU&ZUKI GSF1200 Bandit 2001-2006
For SU&ZUKI XF650 Freezing 1997-2004
For SU&ZUKI VL800 intruder Volusia 2001-2004
For SU&ZUKI SV650 1999-2002
For SU&ZUKI GSX1300R 1999-2007
For SU&ZUKI GSX750F Katana 1998-2006
For SU&ZUKI GSX600F Katana 1998-2006
For SU&ZUKI GSX-R750 1996-2019(Not fit 2000)
For SU&ZUKI GSX-R600 1997-2000 K1 K2 K3
For SU&ZUKI DL650 Vstrom 2012-2019
For SU&ZUKI DL650XT Vstrom 1999-2002
For SU&ZUKI TL1000 R/S 1998-2003
For SU&ZUKI VL1500 intruder 2013-2017
For SU&ZUKI VZR1800 2011-2019
For SU&ZUKI intruder c1500 2013-2017
For SU&ZUKI Boulevard c90 2013-2019
For SU&ZUKI GSX250R 2018-2019
For SU&ZUKI GSX1000F Katana 2019
For SU&ZUKI GSX1400 2001-2009
For SU&ZUKI GSXR1000 2001-2016
For SU&ZUKI GSXS750 2015-2019
For SU&ZUKI GSXS750Z 2018-2019
For SU&ZUKI GSXS1000 /F/A/FA 2015-2019
For SU&ZUKI GSXS1000Z 2018-2019
Locate the Speed Sensor connector:
The Speed Sensor is usually mounted on the front sprocket cover, and the 3-pole black speed sensor coupler is situated 20-40 cm (8"-16") away from sensor.
The connector is accessible by raising the fuel tank, removing the seat or a side fairing.
Confirmation:
Separate the Speed Sensor connector (you might need to use a small flathead screwdriver to get the connector apart).
Connect the Green wire to this wire, using the Red wire tap connector supplied.(The green wire is connected to the crankshaft sensor signal line)
Setup:
You need to setup the module after installation. When ignition is turned on, the display counts b
$14.99
$ 6 .99 $6.99