Your cart is empty.
Your cart is empty.Product Description
Red Dot for Mounting Camera
Lens Lock Switch
Aperture Unlocking Prompt
Iand
Reviewed in the United Kingdom on May 12, 2024
Was good fitting to camera and lens after purchasing another brand which moved 2mm or so! Much happier with this one and no worries of causing damage to my Leica glass.
ish
Reviewed in Spain on March 6, 2024
Fits so well it won't come off again. I can't remove it from lens. I tried everything The lens was brand new and expensive. I contacted the seller (no response). And the manufacturer (told me to read the manual)
samiam
Reviewed in the United States on March 15, 2024
Got this thing to use with my Nikon Z50 with a nikon to fujix adapter. bit strange I know, but this thing got the job done. IT has good all metal construction and connected perfectly5/5
Kunde
Reviewed in Germany on November 3, 2024
Ich habe es für meine Fujifilm XT30ii und mit dem Adapter kann ich die Objektive von meiner Leica M nutzen. Es bleibt alles manuell aber für den Preis fand ich den Adapter ziemlich gut.
DanC
Reviewed in the United States on January 3, 2024
No complaints
Rijstraket
Reviewed in the Netherlands on April 25, 2024
Lens zit niet goed vast in de adapter en wiebelt als een gek. Als het pinnetje waarmee de lens vast wordt gezet ingedrukt blijft kan je de lens doordraaien. Ook is de mount simpelweg niet dik genoeg. Neewer zou zich moeten schamen voor dit product. Ontzettend zonde van het geld, geef de twee tientjes extra uit voor de adapter van Urth en bedank me later.
Alan Wolf
Reviewed in the United States on September 3, 2023
Overall, I’m very pleased with this adapter. One of my reasons for loving the Fuji X system is how short the sensor to lens mount is—which makes adapting other lenses to it much easier. (There may be certain Leitz lenses that have a behind the mount depth that is too deep to mount, so do check this before mounting.)As the title says, both fitting this onto the camera body and fitting a lens into it are very smooth, drag less and with a nice click when in place. I’ve used some adapters that begin to feel a bit uncomfortably tight, but not this one. It does feel secure though, with about the same amount of rotational play as a Fuji lens has—in other words, next to none. The adapter is all metal, with nice black anodizing on the rear, and a matte silver finish on the front. I’m not sure what the front (silver finished) metal is. Overall, the fit and finish is very nice. The unlocking mechanism for the M lenses is also smooth feeling.I’ve checked with three M mount lenses (well, one is a screw mount in its screw to M adapter!) and all focused to infinity.
Tom
Reviewed in the United States on August 2, 2023
Been waiting to use my post war Leica glass on my digital camera for a while. The whole line of neewer lens adapters are definitely worth the money. I have several of them and have had no issues with any of them as of yet.
M. Cohen
Reviewed in the United States on July 11, 2023
I received the Neewer adaptor earlier today and have used it to shoot with my Fuji X-E4 with a Leica 35 mm and Laowa 85 mm macro attached. The lens adaptor fits well; fit is firm and there is no play with lenses attached. There is no grating with attachment or removal of the adaptor from the camera body or the lens. (Manual) focusing does not appear affected by the adapter; to my eye, photos are not as sharp using the X-E4 as they are with my Leica M10, but I think that's a reflection of the camera and not the adaptor. In short, I'm happy with the adaptor and will use it often in the future.
Juan_Reviewer
Reviewed in the United States on June 30, 2023
If you have invested heavily in Leica M Mount (Rangefinder) lenses and you also own Fuji X mount cameras, this adapter is great as you can dual purpose your expensive glass and save money in the long run.I tested this Neewer adapter on a Fuji XT-1, X-Pro 2 and X-E1 and used various M-mount lenses.Fit and Finish:Smooth finish without any sharp edges. The adapter does have a matte finish on both the black and silver surfaces. I did not notice any reflection issues between the sensor and lens on the inner black surface. The silver portion of the adapter gets covered by the lens mount, so no reflections there.The adapter mounts solidly onto the Fuji bodies with just the right amount of resistance and no wobble.The lens lock / release button on the adapter has the typical tiny amount of freeplay due to tolerances and production costs and is on par or better than all my other adapters with this type of design.The tolerance between the lens and adapter is good and there is no adapter / lens wobble.Functionality:Works quite well. I can reach infinity focus just fine. I don't get any light bleed and it mounts precisely onto my Fuji camera bodies. Images taken are as expected. Good tolerances without having to worry about fitment.Verdict:Good value. Solid camera mount. No lens wobble. Infinity Focus. I can recommend this.
All Photos All the Time
Reviewed in the United States on June 23, 2023
One of the great advantages of owning a mirrorless camera is that you can mount many vintage lenses to them. I ordered this NEEWER LM to Fuji X Lens Mount Adapter to try a couple of old Leica mount lenses on my Fuji X-Pro1.The adaptor fits the X-Pro1 perfectly. It locks into place as well as a standard XF lens and detaches as it should. The interior of the adapter is matte black, so there is no issue with internal reflections. The Leica lenses mount easily to the adapter. My past experiences with lens mount adapters has been mixed. Sometimes the lenses are too tight on the mount, and sometimes they are loose and will wiggle around. I found neither issue with this Neewer adapter, My Leica lenses attached easily, did not wiggle once attach, and were easy to detach.This adapter will not perform miracles. Your manual focus, manual aperture lenses will not magically become autofocus. You will have to find the menu option on your camera that allows you to "shoot without lens." You will have to come up with a reasonable strategy for manually focusing your adapted lenses. If your camera has in-body image stabilization, you may be able to specify the focal length of the adapted lens you are using so that the IBIS works properly.There are many different brands of lens adapters being sold. Overall, I'm impressed with this offering from Neewer.
Moderate Potato
Reviewed in Canada on November 19, 2023
TL;DR - A well machined, simple adapter that gives you everything you need and nothing you don't. Also considering you're mounting M-mount lenses you've probably got the cash to spare on this adapter.This adapter fit my Summicron-M 50mm F2 without any issues. Fit was tight and secure. Mounting it obviously was not as buttery smooth compared to say, an M11, but it was acceptable.Locking mechanism works as intended.Given the short distance of the adapter, issues of internal reflection are a non-issue.Overall a solid adapter. If you're able to get it on sale it's a no brainer.
Vince
Reviewed in the United States on October 11, 2023
The NEEWER LM to Fuji X Lens Mount Adapter provides compatibility between Leica M lenses and Fujifilm X mount cameras. It's a manual focus adapter with no electrical contacts, allowing you to use your lenses in manual mode. The adapter features a durable matte metal design with a matte black interior to reduce unwanted reflections. It's easy to install and remove thanks to the quick-release button and locating the red dot. If you have Leica M lenses and Fujifilm X mount cameras, this adapter can be a useful addition to your gear.
Recommended Products
$25.95
$ 10 .99 $10.99