Your cart is empty.
Your cart is empty.Product Description
O'SKOOL Automatic Vacuum Switch Allows Power Tool to Turn Vacuum/Accessory on and Off Automatically
Use high-quality materials: UL-certified US standard 3-pin AC power socket. UL-certified US standard 14AWG power cord. And the switch's shell is made of PA-765 flame retardant material. Make you safer and more reliable at work.
Max. motor rating should not exceed 120V, 15A,60Hz, 1875W.
- Electrical Specifications
- Outlet Required: Standard 120V, 15A, 60Hz Outlet
- Power Rating: 120V, 15A, 60Hz
Good quality:
- The thickness of the copper foil on the PCB of the switch is 2 ounces, the general thickness is only 0.25 ounces, the copper foil is too thin, and the relay on the PCB version is easy to burn out, so our switch is more durable and better than the other brand switch.
- This switch adopts valley switching mode to ensure that the spark of the relay will be minimized when starting, which can extend the service life of the switch.
- Use high-quality materials: UL-certified US standard 3-pin AC power socket. UL-certified US standard 14AWG power cord. And the switch's shell is made of PA-765 flame retardant material. Make you safer and more reliable at work.
HOW TO USE
1.Connect the power of Automatic Vacuum Switch.
2.Insert the electrical tool to the socket labelled TOOL.
3.Insert the vacuum cleaner or work lamp to connect to the VAC socket.
4.The electrical appliance inserted in the VAC socket must be kept at the ON status.
5.When the electrical tool is switched on, the vacuum cleaner or electrical appliance connected to VAC will switch on immediately.
6.When the electrical appliance inserted in the TOOL socket is switched OFF, the electrical appliance connected to the VAC socket will continue to operate for 10 seconds and then stop.
Automatic turn on the vacuum when you start your tool , and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work. Saving time and electricity, reducing airboin toxin and noise that may lead the health problem. This can protect your health.
Package Included:
- 1x vacuum switch with 15'' power cord
- 1x Installation instructionket
we six
Reviewed in the United States on March 9, 2025
Works great
Nick Friberg
Reviewed in the United States on March 16, 2025
I am rating this as a five at present. I ordered two; one works as expected the other does not. I don't expect perfection. Based on the return process, receipt of the replacement and it's operation, I will revisit this review to confirm the rating of 5.Three days later: Received the replacement switch the next day! Operates as expected. Reliable service!
BTN-TX
Reviewed in the United States on February 22, 2025
I use it on my table saw, mitre saw, and drill press. I was forgetting to turn on the vac about half the time.
frank
Reviewed in the United States on January 5, 2025
This works absolutely flawlessly, I have it hooked up to dust cyclone and mitre saw. The best feature is the dust collector continues to run for 5 seconds after tool stops!
Walter Messa
Reviewed in the United States on April 27, 2025
I ordered two of them. Them both work as advertised. I wish they had a longer cord. The cord length deducted a star from the review.
Robert Renner
Reviewed in the United States on April 17, 2025
This is great! I love having this in the shop. When the tool is turned on the vacuum comes on automatically. Then when you shut off the tool the vacuum shuts down automatically (with a short delay after to help clear the hose of debris). I use this for my drill press, table saw, bandsaw, router, sanders, and grinders. I look forward to getting a few more. The only downside is unplugging it to move from machine to machine. I've put a lot of hours on mine with zero issues. It's worked flawless each time.
Blackjack
Reviewed in the United States on April 15, 2025
I dont know how i lived without these in my shop! It works like it should. I have it connected to my table saw and to my shop vac it works awesome. I love the delay shut off for the vacuum. I believe its a 10 second delay before it shuts off vacuum. I cant say enough about these they work and are a huge help around the shop. You dont have to worry about running around turning on a vac and then your tool and fumbling trying to turn your vac off. Just plug the thing in connect your tools and your set. I love these!
えいだい
Reviewed in Japan on April 14, 2025
思い通りに 連動してとても良かったですただ届くのに時間がかかったので早めに注文した方が良いですよ
Ryan
Reviewed in Canada on August 25, 2024
Hooked up to my router and it works exactly as described!
Adam Drake
Reviewed in Canada on August 2, 2024
It works as it should and, while you could say it’s lazy to have a $50 device control a connected vacuum, I say it’s efficient. One quirk is that the XPS LED light on my DWS780 mitre saw will often trigger this to turn the vacuum on. I recommend grabbing this when O’Skool has the occasional 10% off promo.
Etienne Gallant
Reviewed in Canada on March 27, 2024
I have now used this adapter in my shop for the last 6 months. It’s combined with a big DeWalt shop vac along with table saw or router table mostly (occasionally the mitter saw). I must say that its working flawlessly as advertised. Why then am i writing this review?After receiving the switch, i looked everywhere on the product or documentation to find the UL logo somewhere. Nope!A quick email to the seller gave me an accurate answer:**I would like to make aware potential buyers that having UL components doesn’t give this vacuum switch the UL certification.** This was the answer from the seller.I purchased this switch based on others reviews and the UL name mentioned in the product description. It mislead me to believe that this device is fully UL approved.**IT IS NOT!I only use it when i am present in the shop and doesnt leave it plugged. Doing so reduces fire hazard risks. I always prefer to have UL or CSA certified products. This is a sure sign of quality components AND properly tested devices.My 2 pennies.
Victor
Reviewed in the United States on October 21, 2024
This automatic switch works great, I have a fan that was running 24 hours on the back side of my freezer. With the automatic switch the fan turns on after the freezer compressor is running and it shuts off few seconds after the freezer compressor stops. This great, not more annoying fan noise, and it helps on the electric bill.The only comment is that the freezer electric cord plug blades are 90 degrees, and is a little difficult to connect the fan's electric cord, other than that everything works works like a charm.
Miguel Á.
Reviewed in Mexico on March 27, 2022
Excelente para encender incluso un colector de polvo de 2 caballos, aunque yo lo instale para una aspiradora.
Recommended Products
$40.98
$ 19 .99 $19.99