Your cart is empty.
Your cart is empty.Pat's Easy Change System will save you time and hassle. This easy-to-use system is flexible, durable, and affordable! Our system changes lift arms from a standard ball to a hook system, allowing the operator to hook the lift arms to the implement from the tractor. It fits over the end of the lift arm (attached by a pin through the ball and a U-bolt for stability). Pat's Easy Change System is what you need to hook up all your implements without lifting and moving your heavy implements into position for attachment. Everything needed to install our system on a tractor is included. MEASUREMENT: Category #1 is 1-1/2" wide x 4" tall, with a 7/8" hole in the ball of the tractor.
mike keenon
Reviewed in the United States on April 29, 2025
Made life easier.
cliff
Reviewed in the United States on February 14, 2024
definitely good quality and sturdy, would recommend
spree77
Reviewed in the United States on January 19, 2024
I bought a quick hitch and found out that everyone one of my implements would need to be reworked to make it work (lots of work). I bought these and after 20min. Install I was hooked up to my brush hog easy and tried it with the box blade same thing worked great. This is awesome!!!!
Allan
Reviewed in the United States on July 5, 2023
Hooked up easy haven’t tried out yet but is installed on my tractor can’t wait to try them out. Used for the first time. Hooked up great and quickly, couldn’t be more happy on how quick it took to get my equipment hooked up. Would recommend this product.
USMC 0351
Reviewed in the United States on July 14, 2023
Had this thing in the cart for about a year and never pulled the trigger...finely didgood investment cut down on time hooking up bush hog also safer I don't have to push,pull and pry to try and get holes to line up with polls should have bought years ago
Customer
Reviewed in the United States on August 2, 2022
Easy change is very heavy duty, but the roll pins holding the hook latch and the Main link Cotter pins Rusted in One day. Pat’s should have coated roll pins with some anti rust and used galvanized or stainless cotter pins. I’ve never had a cotter pin rust before? Kind of disappointing to see rust after the first day!
M. J. Sears
Reviewed in the United States on March 30, 2022
This is a game changer.It is easy peasy. First install takes about 15-20 mins. Hooking up takes about 1 min. Adjust you three point lower arms to be the proper distance apart for your attachment. Use the included spreader to hold them in place. Backup. install your top link. Make sure the pat's each hitch is setup to allow and attachment to be picked up and then lift and them lock the pat's easy hitch. Then adjust you top link and lower arms for the right position and you are done.It is the most flexible easy attach system. If you have old or new implements it just always works. You can mix and match vendors. And they just work.
Michael A.
Reviewed in the United States on October 11, 2021
Have used on two implements and did makefor easy transfer. Spreader bar can be useful but needs to come off for pto shaft (inconvenience).
Recommended Products
$51.09
$ 24 .99 $24.99
$249.97
$ 99 .00 $99.00