Your cart is empty.
Your cart is empty.PrimoChill takes pride in providing solutions, and PC PURE is the solution to your water cooling fluid dilemma. Its clean, low viscosity creates an excellent fluid for your computer. If you are a performance purist looking for an affordable and efficient solution, the ONLY solution is PC PURE. The name hasn't changed, the performance is still top notch, the cost is still outstanding, leaving PC PURE ounce for ounce STILL your best choice. Included Parts 1x 32oz bottle of Pure Performance FluidWarnings We recommend athorough cleaning of all tubing and system components prior to priming your system with ANY coolant. Flushing your system with SysPrep will remove any particles as well as any residual that may exist from previous build or the tubing manufacturing process *Low Conductivity : As with all Low-Conductive fluids, PC PURE can become more conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Low-Conductive aspect of PC PURE is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. DO NOT MIX: We do not recommend mixing any other agents with the PC PURE fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Not responsible for any hardware damage. Use at your own risk.
Carlos varon
Reviewed in the United States on May 1, 2025
No viene con la caja como se ve en la publicación pero esta sellada y vamos a ver como es la calidad.
D. Pomeroy
Reviewed in the United States on February 19, 2023
It’s Primo Chill. I’d be shocked if it wasn’t less than advertised.
Michael C. Luster
Reviewed in the United States on December 10, 2023
Like any show cooling liquid, it looks beautiful in the reservoir, tubes and CPU block. I will get plenty of positive feedback.Things were great until, I had to change out my liquid. I ran Sys Prep with distilled water, knowing that it had a tough job ahead. This got maybe 95% of the gunk out. Unfortunately, some of the sediment from the cooling liquid sank o the bottom of the reservoir and the pump. So, the only way to really get rid of this stuff is a complete teardown, and possibly replace anything that is stained.Bottom line this show liquid looks wonderful but know what to expect with the risks
Christopher
Reviewed in the United States on March 23, 2022
I always use primi chill products. Well priced and premixed for easy use.
J512
Reviewed in the United States on February 27, 2016
I have used PrimoChill Pure (Clear) coolant since 2012 and have been changing the fluid once a year and so far the system has remained clean. No need to mix anything else or use a coil, just make sure you use copper components and this fluid, and you should have a clean running system. The block, pump, res, and tubing have been amazingly clean eveytime I have changed out the fluid.
Sabrewings
Reviewed in the United States on February 8, 2015
This is the only fluid I use in my PC anymore. Works great, and my pump is going strong after 100,000+ hours of operation thanks to its lubrication properties (and its one moving part and single ceramic bearing). Thanks PrimoChill!
Tech Buyer
Reviewed in the United States on June 10, 2014
Yes this liquid cools my system better than mineral water. And no, mineral water IS NOT better than this liquid to run through your system.PrimoChill Pure Performance is the only liquid coolant you'll ever need. No mixing, no dies, just the good ole clear stuff.I would suggest stopping all other water coolants, including mineral water. This liquid does not corrode your waterblocks or tubes, or components like mineral water WILL. If it hasn't yet, just wait.I've ran this liquid in my custom builds and commercial builds for years. Trust me as a enthusiast grade custom builder, this is the best stuff. Period.
Christopher
Reviewed in the United States on April 17, 2013
I have an Intel I7 2600k clocked to 4.4 GHz and recently changed my fluid to a normal distilled water solution.I was averaging about 47C under load, since putting this in I am running at about 43C under load. So it is helping keep my cooling system clean and transferring heat better. This stuff works!
Recommended Products
