Your cart is empty.
Your cart is empty.MAZDA MIATA RR DIFF SET 90-97Transmission Crossmember Mount BushingTRANSMISSION MOUNTS
Customer
Reviewed in the United States on March 18, 2025
Took a lot of movement out of my differential. However, naturally they are going to absorb less vibration than your standard rubber bushing.
Hollyn Mcelvain
Reviewed in the United States on October 17, 2023
Worked for my 94 miata 1.8 diff!
Senior
Reviewed in the United States on May 11, 2021
I advise you to have the tools and knowledge to improvise to install these solid bushings. This is not easy and as you may find yourself hurting your self or damaging the rear end, CV shafts, brakes, seals, etc. Do you have a press, good floor jack, plenty of degreaser, I've this on two occasions and it took a lot of time and patience. It is not the bushings that are the problems, it is the removal of all the stock components keep up with everything!
Peter
Reviewed in the United States on June 24, 2020
Complete and a good fit. Eliminated the rear end clunk noise on my 200,000 + mile NB1 Miata.
Scuba Steve
Reviewed in the United States on July 9, 2018
Toss your diff plates in a fire pit to melt the rubber off. These are nice bushings.
Autoaficionado
Reviewed in the United States on April 4, 2018
Fit PERFECTLY for diff swap to a ‘99 1.8 diff on my ‘93 miata. Description did not make it obvious that it would work, but if you are replacing your 1.6 diff to a 1.8 -this is EXACTLY what you need.
LOLFWD
Reviewed in the United States on September 17, 2016
I used these during the install of a torsen differential in my miata since my poor 1.6L differential had gone to pieces.The install is pretty straight forward, however I'm going to knock a star because they do not include or even mention lubricating the bushings. I used some ES hyperlube that a friend had sitting around to make sure that they would not squeak on me.I will say these do add a fair amount of NVH into the car...
Recommended Products
$47.56
$ 20 .99 $20.99