Your cart is empty.
Your cart is empty.Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components.
troy
Reviewed in the United States on April 26, 2023
Was easy to install
brian bever
Reviewed in the United States on June 27, 2022
Overall the product quality and the seller is great. The only issue I ran into is the upper control bushings for not come with new inner sleeves. And living in the rust belt creates the issue of installing old sleeves that are corroded beyond further use. The real issue is finding new sleeves to replace the old worn sleeves. Turning a few hr job into a nightmare. Do not install worn sleeves because they will cause premature failure leaving you to replace way to soon.
H Yaeger
Reviewed in the United States on April 27, 2021
Could use more silicone grease. Never installed these before but my originals on the 2000 Chevy 3500 crew cab were shot. Touch the breaks lightly and had to hang on the wheel because the A arms would shift. Put these in and had it aligned. Problem solved.This was not an easy install. Watch some U tube videos and prepare to get a little pissed at GM engineering.Especially that bolt that is in ass backwards. You will know what I'm talking about when you get to it.I did figure out how to extract it without cutting it off like the videos show. Put it in correctly when I reassembled.
Ernesto Castellanos
Reviewed in the United States on January 6, 2020
Horrible.It does not matter how much silicon grease you apply. You have to degrease them often.I end it up going back to the conventional.Waste of money and time
landon copeland
Reviewed in the United States on January 19, 2020
These are the best way to get your front end to never have issues on k1500 trucks from 1988- 1998. Thanks prothane you guys do awesome work.
Richard colliers
Reviewed in the United States on July 4, 2019
Good fit should last a lifetime
Captainpoho440
Reviewed in the United States on August 29, 2017
Fit real good. Easy to put together better quality than the ones that come complete that need to be pressed in. So far has been working extremely well on my chevy k2500 3/4 ton 4x4 pickup especially here on Maui where the roads where I live are pretty bad. I take my truck off road and trough verry talk thick cane grass and small trees and the stock original bushings and steering parts give out where theese stay solid and work perfectly with the independant front suspension. The 3/4 ton has a very stiff suspension when you dont have weigh in the back but theese bushings have made the ride a bit more smooth. Will be using theese on both my trucks and the trucks and cars that I work on.
Cragmyer
Reviewed in the United States on November 29, 2017
Really helped give a tighter feel to the truck. Pretty easy to install if you have a torch and a good bench vise.
Recommended Products
$28.95
$ 14 .99 $14.99