Your cart is empty.
Your cart is empty.Jessica M
Reviewed in the United States on February 23, 2025
I used these parts on a Stampede I am building from a chassis, and I am very satisfied with the quality and how all this fit together. Every piece has a nice finish on it and installation was a breeze. If you're building a truck, just grab one of these upgrade kits to start with.
PH_Brewer
Reviewed in the United States on January 3, 2025
As I have been upgrading and replacing some parts of my 2WD Rustler, I wanted to get the front caster blocks and new bearings. The rear already had a set.They fit perfectly, just like OEM. All parts where there. There weren’t any sharp edges, literally all parts were great.Here’s are the 2 issues:• First, for any metal-to-metal parts, you should always use Threadlocker. None of the screws/bolts had it so I applied it. If you don’t have any, order the medium (blue) as it is removeable. If you use red, you may not be able to get the parts back off if you need to.• The other issue is a diagram or instructions. Granted, most of the parts are an easy part-swap. However, for the front, you need to secure the steering blocks to the caster blocks. If there was only 1 bolt, it would be one thing, but there are a variety of screws/bolts so you have to match the OEM screws/bolt to the new ones. In the packages, some are attached so you get an idea of what hardware goes with which parts. If a diagram was included, it would make things easier.
Kindle Customer
Reviewed in the United States on April 4, 2025
For a 2wd Bandit. Had to return. The holes on the caster blocks Where they mount to the swing arms Were too small. The pins that were sent would not fit in neither Would the originals not to mention the fact that the hole on the right castor was bigger than the hole on the left castor. I had the same problem with the stub axles. The mountaintolls were too small, they did not match the holes for the mount pin. The set came with a smaller mount pin that fit the holes of the new caster block but was too short and was too small for my swing arms. they also sent a larger set of mount pins That was a right length and write sickness for my swing alarms. However they would not fit in the holes on the aluminum stub axles
Juanita
Reviewed in the United States on April 20, 2025
Got this upgrade kit for my Rustler and it is amazing! It fit perfectly and everything is well made and very durable. Easy to install and adds strength. Very happy with this kit, highly recommend!
Peekablue
Reviewed in the United States on December 9, 2024
Fitted these parts to my sons 2WD Stampede.Not only is the truck beautiful, but all four corners are indestructible now.The parts are very well made, and everything you need except some blue locktite is included.The included stainless hardware is beautiful and very strong as well.I can't find a reason to complain, these parts are top notch.
customer
Reviewed in the United States on December 6, 2024
Broke my front right from running in in super cold weather and probably also being as old as it is. These are a perfect replacement and should last forever. Install is fairly straightforward. Just pay very close attention to how the stock ones are assembled and installed and use that as your guide. Hold the old one up to the new one to know where to install your links and then you can make adjustments from there based on your needs.Quality is fantastic. Bearings are buttery smooth, anodization looks great and everything has held up to some gnarly abuse so far. I run mine with a 1412 3800KV Castle motor on a Copperhead ESC on 3S and it is quite rowdy.Super happy with these and I would definitely recommend them.
Bethany Latronica
Reviewed in the United States on December 14, 2024
I have purchased this brand of RC parts before and they are a perfect fit for the Bandit 2wd. Very sturdy, high quality parts. They function exactly as they should.
Kyle
Reviewed in the United States on November 22, 2024
They fit perfectly, look amazing, vibrant red anodize color and pretty strong. I have no complaints with these so far and would recommend these to anyone else wanting to upgrade. Bearings fit right in and so did the spindle. I had a wobbling tire before and now it’s gone. Just a little amount of play as you would know a brand new oem part
Recommended Products
