Shopping Cart

Your cart is empty.

Your cart is empty.

Runleader Digital Gas Engine Tachometer, Hours & RPM Record,Backlight Hour Meter,Battery Replaceable for Riding Mower Generator Compressor Snowblower ATV Outboard Motor Jetski

4.5 (7) Write Review
Free shipping on orders over $29.99

$23.99

$ 12 .99 $12.99

In Stock

About this item

  • HOURS--- Total time (TOT); resettable partial timer (JOB); maintenance reminder (SVC1&SVC2); initial value setting (INT);TOT & JOB hours read up to 99,999 hours;SVC timer range:0-1000 hours .
  • RPM--- Real-time RPM; maximum RPM; RPM alert; selectable RPM refresh rate:0.5/1s;RPM value correction by engine firing patterns and measurement range selection; the RPM measurement value range is consistent with the set alarm range: 0-25000RPM.
  • BACKLIT DISPLAY--- Split screen display is convenient to view multiple functions at the same time;Green backlight will help to use it at night or the dim place, you can set the backlight for always-on, OFF and automatical mode as request; Red backlight will remind the maintenance intervals arrival and RPM exceed.
  • ECO MODE--- Battery capacity will be kept in good condition with insulation sheet before using or during transport; Replaceable battery compartment and LCD shutdown also can extend the lifetime in vacant time.
  • OTHERS--- 24-H clock;Easy installation with Velcro/screw;The wire connecting the product can be extend/shortend( length:appox.68.8 inches);waterproof resistance by whole housing design and back O sealed ring; User data will be retained after display shutdown or battery replaced; Reliable technical support and after-sales service(2 years).


Runleader Tachometer Hour Meter, TOT,JOB,Maintenance Reminder,Initial Value Setting,Current RPM recorded, Alert RPM, Green&Red Backlight Display, User Data Storage,Waterproof Design.
Hours
￭ Timing read up to 99,999 hours,0.1/1 hour accuracy.
￭TOT hours is non-resettable but automatically clear if exceed max value.
￭Count-down tracking for maintenance time, remind the arrived status by flashed icon and red backlight.
￭ TOT initial hours can be programmed for replace an old hour meter.
￭Maintenance time range: 0-1000 hours.
￭Record the times per engine working period.
RPM
￭ RPM measurement range 0-25000RPM,10 RPM resolution.
￭ Display MAX RPM since engine started.
￭ RPM alert channel for speed exceed, remind by red backlight and flashed warning icon.
￭ The engine firing patterns and RPM measurement range to be chosen for RPM accuracy adjustment.
￭ Suitable for gas engine:2 stroke 1 cylinder/2 stroke 2 cylinder/2 stroke 3 cylinder/2 stroke 6 cylinder
4 stroke 1 cylinder/4 stroke 2 cylinder/4 stroke 3 cylinder/4 stroke 4 cylinder/4 stroke 5 cylinder/4 stroke 6 cylinder/4 stroke 8 cylinder/4 stroke 12 cylinder/4 stroke 16 cylinder.
Specification
￭ Operating button colors: Red,Blue,Black.
￭ LCD window size:approx.40.8*16.8mm(1.6×0.66 inches) .
￭ Product size:approx 68.5*34.9*17.2mm(2.69x1.37x0.67 inches).
￭ Accessories: 3M adhesive velcro,Set screws*2,M3 hex nut*4,Flat washer*2,Cable tie*2,CR2032 Battery, User manual.
￭ CE ROHS certification.
￭ Waterproof rate: IP65.


RUOK
Reviewed in Canada on November 6, 2024
Works as advertised,saw a video about looping the wire around a battery clamp and it is alot easier then wrapping it around the sparkplug wire. Like how it shows the max revs also the backlight makes it easy to see the display.
Justin
Reviewed in Canada on April 7, 2024
Only thing is that it’s a 24 hour format can’t switch to 12Hr
Customer
Reviewed in Canada on September 15, 2023
Cons; moisture gets under the lens and it doesn't shut itself off.Pros; it reads good in all weather and never fails to turn itself on. Not much of a battle to install.
Customer
Reviewed in the United States on November 11, 2023
Overall, this thing does exactly what the advertisement says it will do. I have, however, one important piece of advice for anyone who buys this unit - the very first thing you need to read in the manual is how to disable the background illumination. When you start programming the unit, the factory default setting is such that the background light is ON. The manufacturer should change this to the OFF position, and here is the reason: the unit is powered by one CR2032 lithium button cell. Nothing wrong with that, but this type of cell is not intended for relatively large current drains (on the order of several mA) posed by the background light. This will result in rapid drainage of the battery, and by the time you are done with all the programming while the light is on, the battery will be completely exhausted. In my case, the battery dropped from 3 bars when I started to program down to one bar when I was done. If you turn off the light at the very beginning, you will preserve 99.9% of the battery energy you would otherwise use with the light on. Even with the light off, the display is still perfectly legible, just use a good desk lamp or some other source of light. Also, keep in mind that when you remove the battery, all the programming you have done will be lost, and you will need to start all over again, which is another whine I have regarding this unit. Have fun playing with this thing!
Golferguy
Reviewed in the United States on June 5, 2022
Nice to know run time and RPM during break-in. Also might provide good information for sizing prop. The size is ok but a bit small and hard for me to read at a distance, otherwise easy to install and seems accurate.
Drew S.
Reviewed in the United States on March 12, 2022
The tach worked well, but if your using in a moist environment then look elsewhere. Mine got moisture in it and went bad in only a couple months.
Terrasse
Reviewed in France on June 21, 2021
Conforme à la description faciliter je l'ai monté sur un paramoteur pour le rappel des révisions.L'heure et le retroeclairage sont un plus