Your cart is empty.
Your cart is empty.Product Description
Flexibility & Durable
Lightweight, excellent flexible, good elastic and resistant to chemicals, solvents, alkalis, and acids.Stretchable, and resistant to kink, non-deformation and high tear resistance. The silicone tubing can be used with most commercial barbed fittings and connectors.
High Temperature Resistance
Silicone hoses have a wide range of applications, can be used at room temperature, as well as in high or low temperature environments. Not soft at high-temp, not hard at low temp, maintain stable performance at -40℃ to 240℃(-104℉ to 464℉)
High Quality Silicone Material
Our silicone hose is easy to use, shape and bend, can be easily cut by any cutting tool.and can withstand rough handling and multiple usage while maintaining dimensional stability.
A lot of performance problems can be caused by old,split and leaky vacuum lines.
When your old vacuum hose is damaged and weathered by heat, it will be a very practical replacement accessory.
Shane Ravenbane
Reviewed in the United States on March 4, 2025
Reviewing: Silicone Tubing,9mm ID x 12mm OD Pure Silicon Tube High Temp Silicone Hose [for Home Brewing,Pump Transfer,Aquaponics]-3.3 ft Length/BlackI use this as breather-hose on my carboys while fermenting mead. It works well, never kinks up, and is easy to clean.
synz4gyvn
Reviewed in the United States on April 20, 2025
As described, works for my purpose, but took a very long time getting here, several weeks.
bufulo
Reviewed in the United States on April 18, 2025
I've been looking for flexible tubing to use in my small form factor PC build that requires some tight radius bends. This turned out to be the best I've found so far! This tubing doesn't kink with a 35 mm radius bend and will go smaller although flow is reduced slightly. It still flows but starts to kink at around a 20 mm radius. The official bend radius isn't specified by the manufacturer, but my guess is that it would be right around 40 mm.The outside diameter (OD) measures 12 mm and inside (ID) is 8 mm - exactly as advertised. I received just over 40" so about an inch extra over the 1 meter advertised length - cool. The surface is smooth and glossy and the texture is just sticky enough to collect and show dust. Not a big deal but worth noting. Being so smooth, it's easy to clean. The stickiness does make it a little tricky to slide over fittings but that also means it stays put well once in place. The high temperature stability means you can use various heat shrink type clamps as well - bonus cost and space savings!Silicone has a wide temperature range, easily covering water cooling for personal computer use. It's tough but cuts easily with a razor knife and even large scissors (especially those with that special notch for cutting soft tubing). The pressure range is way above and beyond anything you'll ever see in any PC water-cooling application. The current fad is to use larger diameter tubing but for small form factor PCs, that wastes a lot of precious volume in the case. IMO, this is the perfect size for most PC water-cooling applications.It's a great quality product at a very good price and I'm glad I found it!
Recommended Products